Viewing all customer Discussions for:

81-007 Sliding Door Roller, Remington

Hi, I need to get two rollers for glass sliding door. Please identify those from me as shown on the pictures attached. The overall dimension of roller is about 2 1/4 inch long, 1 inch wide, 1/2 inch thick. Its ball bearing outside diameter is 1 inch and inside diameter is 3/4 inch. ... (cont.)

Can't seem to find anything simular

The depth of slot at the bottom full glass sliding is 1 1/4" and the width outside width is 5/8". Thank you for your help. Gene

I am looking to replace sliding door assembly. Please look at the attached photos of the broken part and let me know the matching part number. Thanks, Zoran

one of the part is marked 138 and the other piece marked A/s, as you can see in the pics. please help me to find a right part. thanks

Hello! I am looking for replacement rollers for a milliard sliding patio door. There was a sticker on the door that said "Series 410 SGRD-R15" and "MST: 80610 (OX)". We also need to get a cover for the rail, since it is chipped in places. Can you help? Thanks!

We need the track and rollers for this sliding patio door.

the number stamped on it is 138 the dimensions are 2/14 inches long, 1 inch high, and 9/16 inches wide

I need to identify which rollers I need so I can order and replace don't have old rollers because they were replaced by wrong ones here are the pics of bottom rail 20150912_132443.jpg

Looking for replacement rollers for sliding glass door. Do not have photo of them installed. They have the #138 on them. The house was built in '81 I imagine they are that old. We had to take the bottom metal off the glass and slide them out the side to remove them after removing 2 screws on each s ... (cont.)

Here is a picture of the housing. Would part # 81-223 work?

need two replacement single wheel rollers

Looking for replacement rollers and trying to identify these.

After much difficulty searching for the correct replacement rollers for my patio sliding door, I believe your model 81-090 is the closest I have found. My units have the number 138 stamped on the side, but I don't know if that is a properly definable number. The measured size matches perfectly exc ... (cont.)

I have owned the house for 16 years and have started having trouble opening and closing my patio door. I took the door out and found that the rear roller has come off. I tried to find some information on line but to no avail. The label is still attached to the door but is worn. The information I ... (cont.)

think i finally found the product number I am looking for. sliding glass door roller assemblies. 9-273. do you have any? 138

I need to replace the wheel assemblies on 4 doors. They appear to be the 81-007 but I need to be sure. They are stamped with 'CHINA 41781'. All of the dimensions appear to match but your photo doesn't include the width at the tabs. Mine are 9/16" as shown but the tabs are 13/16". Please review the a ... (cont.)

Does this roller have 138 stamped on the outside of the 81-007 roller? Thank You! Denis C.

I need to replace a patio door roller similar to your 81-007 assembly. The current roller is stamped "138". Is 81-007 the correct replacement? The only difference is the current wheel is 1" (maybe I replaced it at some point?) versus the 1 1/8" on 81-007. All other measurements are the same. Th ... (cont.)

Unfortunately the 81-007 does not come in Stainless Steel.