Viewing all customer Discussions for:

81-018 Sliding Patio Glass Door Tandem Roller

Sending pictures of a customer's vinyl window sash locking levers Also, sending pictures of a roller set from their patio door (which I need to replace) Maybe the patio door rollers may also help ID the Mfg Co of the windows.

Im looking for (QTY 2) double patio door rollers. The door says PPG Hurculite. rollers Overall width is = 5/8" Length tip to tip = 6-1/8" Length Housing = 4-1/2" Height of Housing is = 1" to 1-1/4" Center to Center on Double roller = 2-7/8"

set of two pieces. 5 3/4" hole to hole centers 5/8" wide 4 5/8" long 1 1/4" wheel concave

Need replacement rollers. Wheel diameter is 1 1/4” diameter. Mounting holes: hold to hole is 5 3/4”. Overall length 6 1/4 inch. Please advise on correct to replacement product. Thank you.

Markings: Pe del-mar. Roller size 1 1/4". Mounting from hole to hole is 5 3/4". End to end is 6 1/4". we need replacements- please advice correct replacement. Thanks

these are for the same Milgard door . The roller with sizes on the paper and lock. I have look at locks on different sites. The is the other side of a double silding door which places pins in the top ane bpttom. But no jaws come out to attach to other door. Scotty

I have several sliding glass Norco doors. I took the door out, cleaned and lubricated the rooler assembly and they work much better but the wheel bearings are not good. I would like to replace the roller assembles. I am hoping you have a match.

I need 2 of these

Hello,I need 2 assemblies of top rollers and 2 of bottom rollers.SizeTOPW 1 inch. and 3/4 inch; L 1 inch and 7/8 inch(If only nylon wheels are available, they are Diameter: 1.5 inch ; Width: 0.5 inch)BOTTOMW 0.5 inch L: 6 inch

This door was probably installed in around 1979. The only marking is DEL MAR ENGRG CO LONG BEACH, CA PAT. PENDING. The wheel diameter is 1-1/4". The housing is 6-1/4" x 3/4" x 1-3/8". Screw holes are 5-3/4+" apart. Thanks for your help! Kris

Hi, I need help finding these patio rollers, we do not know the manufacturer Please see attached pictures Thank you,

Need bottom track and wheel hardware.

Heavy 4 foot wide sliding glass patio door, need new rollers and the weather stripping that fits into channel. Existing rollers are nylon wheels 1 1/4" diameter, width of housing 9/16", height of housing 1 1/8", installation holes 5 3/4". Thanks!

trying to make my sliding door slide better, I want to start by replacing the 35 years old rollers and also maybe doing something about the track itself - cover? replace? Thanks!

Hi, I`m looking for å replacement for door bogi wheel roller. On my existing its marked with: 1980 U.S. PAT 4.194.266 1982 CAB PAT 1.126579 TRUTH MADE IN USA.

My name Is Bruce Robertson. I need to replace my ( 2 ), sliding glass door rollers. I have added photos of the part. It has Truth, 30410, Made in the USA, stamped on the side. If you carry the part I need I would appreciate an e-mail telling me the details on how to purchase it. Thank you ... (cont.)

I'm dealing with a Guardian Patio Door from 1975. One door is stationary. The rollers have a mounting screw on the latching edge as well as non-latching edge. On the front of the door, on both right & left ends at the bottom, are holes with caps inserted. Behind the caps are adjustment screws, w ... (cont.)

Trying to see if you have these rollers for my sliding glass door. thank you!!

Need replacement for Truth Hardware Housing no. 31761. I believe the roller assembly no. is 39-21. It is imperative that it has the extended mounting tabs.

Hi Vic from South JerseyI need to remove the fixed panel on a slider pation door, the label on the glass says Guardian but they say thats only the glass co. MI windows supplied the door on new consrtuction in 2013, the door was made @ 2010. I need to remove the fixed panel but cannot find any acces ... (cont.)