Viewing all customer Discussions for:

81-018 Sliding Patio Glass Door Tandem Roller

Pat. Pend. Sliding glass door rollers are approximately 45 years old.

Hello, I lesson carefully to your Youtubeurs video that explain how to do so, but my window seems different. I Have a Viceroy house (in France !) made in 1996, and the sliding doors are difficult to handle. I would like to know how I can remove them and where to buy some new parts when necessary. Th ... (cont.)

Looking to see if you carry this wheel. I don't have the make of the door. It is for a older vinyl patio door system. Wheel Dia. 1 3/16 approx. 3/4" thick. 5 3/4 center to center for screw holes.

storm blew door out and I had to reinstall before next storm. I dont know the difference between 81-018, 81-149, 81-182, etc.

Installed in 1978

These came originally with the door installed in the house. The wheels and housing are metal. Didn't see any names or markings.

Looking for glass sliding door bottom rollers and insert that holds rollers. Rollers have part number Truth 3176A, insert that holds the rollers is 34 1/2 inches long by 3/4 inch wide.

Truth. Made USA label 30410 , on lower wheel number 30622 , US Pat 1980 Canada Pat 1982

Stamped on the roller is Del Mar Roller Corp

Need to match Truth Hardware Tandem door roller 31761A

For scale, the OD of the small, separate wheel is 0.98". The OD of the wheels in the assembly is about 1.23". They seem to be worn, so they might have been larger diameter. The length of the length of the side plate is about 5.13". The distance between the mounting hole centers is about 5.75" ... (cont.)

I need a Match

6 1/8 inch long, 5/8 inch wide

Looking for replacements to these which fit into a patio slider with an extra thick/heavy door.

Looking to see if you guys are able to help us source replacement wheels for a sliding glass door.

Length 6 7/16. Holes 5 3/4 Width. 11/16 Height 1 1/2 Wheel 1 1/4 Metal rollers Think its 81-146

Hello, I need 2 Truth glass slider rollers. See picture. You will notice the bottom of the wheels retract even with the mounting brackets I prefer the rollers in stainless steel if possible.

Hello, can you identify the correct part for us to order?

Can any give me a part # for this I've look on your website and cant seem to find one with the nylon spacer on top any ideas? Thank you Daniel

Are these available?