Viewing all customer Discussions for:

81-018 Sliding Patio Glass Door Tandem Roller

pat pending. "A" house was built in 1971

Hello, One of the wheels on this assembly had widened in one portion and seized. We were able to bend it back into shape and it is now spinning freely, but I'd like to have a replacement on hand for if/when it fails again. Was hoping you could help me identify the part I need.

Believe the door to be a Marvin 10 feet. The rollers say Del Mar engineering but no part number. The wheels are metal rather than plastic or nylon. Do you have access to replacements?

Hello, I know this model is old so I wanted to know what is the up to date equivalent.

Looking for (1) replacement rollers, (2) bottom U-shaped weatherstipr that goes in that lower notch with the rollers (49" long), and (3) the weatherstrip that goes to the outside at the bottom (img_1780). That outside weatherstip is roughly 3/4" tall and there is a 3/8" horizontal part that was scr ... (cont.)

New rollers needed

Need replacement

Rollers need to be replaced, but there are no numbers or information indicating what model they are

Make of door is unknown manufacturer. Roller details are: Mounting screw holes are ¼" diameter (countersunk) and 5¾" apart. Wheels are 3" apart Frame is 4 5/8 " x 1¼ x ¹¹/¹6 (not including the 7/16" tall extruded aluminum spacer on the top, which could be "remove ... (cont.)

Also note #30622 on photo Do you have a similar replacement part Thanks, Jim

I need two sliding glass door roller parts

We bought and installed new rollers from lowrs that look the same But we cannot recess the wheels enough to put the door back on the track. We need to be able to recrss the wheels so they are flush with the bottom of the door. Help!! Is there a version of the 5.75" duel rollers that allow withdrawa ... (cont.)

Looking for new rollers I can not locate any information on the door

Screw holes 5-3/4" 1-1/2" tall 6" overall

Heard a snap when closing the door. Removed the Double Wheel Roller. The end of the roller extension with hole fell off roller assembly. Sorry didn't get the requested dimensions. I noticed the extension next to the hole has a round insignia with X. I believe the hole to hole dimension is 6 3/4 ". ... (cont.)

I need 2

Hi, We are in search of two rollers for a Loewen Patio Door. I believe the model number of the door is WP2 1820. There are som identifying marking on the existing rollers. Manufacturer = Truth. Part Number on the Case = 31761A. Part Number on the roller housing = 30622A. I have attached some pictur ... (cont.)

I think it is a Champion door