Viewing all customer Discussions for:

81-056 Patio Sliding Glass Door Roller

tab for screw missing, need to purchase.

Hi, Can you please help me locate the replacement part for this? --rectangular housing 3 1/16 inches long and 1 1/32 high and 21/32 wide --wheel 1 7/32 diameter Thanks, Scott

See attached, the stamping on the roller is DELTA 2185

My sliding glass rollers are old, and opening the door is VERY difficult. I am going to replace the track and thought I would replace the rollers also. I have attached a number of pictures. Do you have this roller or something similar to it that would work? Thank you! Eric

Hello, We need to replace the Kinro tandem rollers on our Fleetwood manufactured home sliding glass door. Can you identify this roller so we can buy the correct ones. Thanks so much!

Can you ID my slider wheels? Thanks Mike DISCO 2185

I am looking for two dozen of these

I need assistance looking replacement rollers for my sliding glass patio door. The door is probably early 70s and I can not find any manufacturer's name or numbers. The overall length of this aluminum channel is approx. 38" and it fits into an opening in the bottom of the wood door. Width of th ... (cont.)

Hello, I have a tandem roller that my client brought in to my office today that needs identification. I will need to make a purchase of 20 such units, however, I am not sure from your photos which roller is most compatible. Attached in this message are several photos of the roller that I received ... (cont.)

Need to find replacement rollers for my sliding glass door. None of local stores had a match. Any help or advice would be great. If theres a store that sells it locally please let me know.

I am looking for some replacement closetdoor wheels for a customer. A year ago I changed out her 2 other closetdoor wheels and all doors are original and the house was built in the late eighties. I was able to find the replacement wheels in Home Depot but a year later they did not have them and I ch ... (cont.)

I need two sets of rollers and a track cap. What I have is almost identical to the generic tandem rollers sold at every hardware store, including Home Depot. The exceptions are 1) the rollers I have are 1" OD and theirs are all 1-1/8" and 2) the tang/tab on mine has a hole through it and theirs ha ... (cont.)

product code # 81-056 is available with 1" or 1-1/4" diameter wheels. Mine measure 1-1/8" at the outer edge. Should I go with 1-1/4" ? Thanks, Doug

Hello! Do I measure the wheel diameter at the bottom of the wheel groove, where the wheel rolls on the track, or on the outside rim of the wheel?

Is the wheel doameter on pn 81-056 1-1/8"?