Viewing all customer Discussions for:

81-087 Patio Sliding Glass Door Roller

The wheels are1 1/4".

I need 4 replacement rollers for 2 vinyl sliding glass doors. Dimensions: length 31/8" height 1" height with two tangs 1 3/16" Width 11/16" roller diameter 1 1/4" roller material - plastic

Do you know which wheel assembly fits in the ReliaBilt slider? It's brand new but they didn't put the screw in that holds the assembly in place.

I am looking for replacement wheels for a weathershield visions 2000 sliding door 1 1/8" diameter.

I ordered Product Code: 81-087 based on some customer questions & feedback, however, I don't think these are going to work. The wheels don't retract enough to provide the clearance me door requires. Do you have any ideas. Sorry no measurements, I may need to disassemble again to provide this deta ... (cont.)

I have a part number of 490540700 which is a carbon steet roller assembly I am looking to get a stainless roller instead for oceanfront house.

Need to replace the tandem rollers for patio door. Looks to be stamped metal housing with 1-1/4" metal wheel.

Hello Swisco, Looking for the wheel assembly in the photo. It appears to be a 81-087 however I need a 1-1/4" nylon wheel instead of 1-1/2 steel. Maybe the 81-166 will work?? Please advise on proper assembly to order. (need 4 pcs) Thx Craig

My patio door only has one hole, not two like your DIY videos show. I have no idea how to get the rollers out of this door. I've included some pictures. Please advise me as how to remove these rollers so I can identify them and get new ones to install.Thanks,Paul

2 wheel with metal ball bearings. Attached is pictures with a tape measure. the back with the adjustment screw and the attachment screw is smooth, the top that rests against the bottom of the door has 2 small protrusions. I have attached a photo of the sticker on the frame of the slider. I hope this ... (cont.)

Door operating very heavy and adjusting rollers ineffective. Roller appears similar to your part #81-158 but tabs shown on top of casing not showing on your part 81-158 (which I have ordered this am). Have I made an error or will 81-158 work for my door? Mark Tooth

I believe I have a certainteed sliding glass door and I need replacement rollers

These look I like your 81-087 rollers except the wheels ar bigger.All other dimensions match the 81-087 except my wheels measure at 1.25" dia vs 1.5" for the 81-087. Any ideas?

It appears that you only have one roller that looks like this roller. Mine has plastic rollers and yours has steal rollers. Are steal rollers better?

I need four of these so my two sliding glass doors can open and close easily. I'm doing this parts search at the direction of the contractor who is also replacing a broken pane in one of the doors.According to the contractor, these doors were made by Insulate Industries which is now owned by Ply Gem ... (cont.)

I need replacement rollers to replace on sliding glass patio doors.Attached is the door ID plate. They are like the #81-087, but the roller wheels are 1 1/4 inch.Can you please help me locating a repair replacement.Thank YouBill

Thanks for reaching out to SWISCO. On this page you will see a list we compiled of different roller assemblies. Take a look at each one and carefully review all of its measurements. See if any of these will match up to what you have. If none of these will work, let us know the measurements you are l ... (cont.)

Looking for sliding glass door rollers as pictured for a CertainTeed door about 18 years old.

Hey again, Looking for the pictured patio door roller but the wheel needs to be 1 1/4" NOT the pictured 1 1/2". The casing is 3/4" wide, 3 1/8" long, 1 1/32" high. Thanks, Erik

Existing door roller/part: 972459 needs to be replaced. Extensive search has been conducted with negative results. It appears your part 81-087 is a close replacement. Are you able to cross reference my existing part to perhaps match one of yours. John