Viewing all customer Discussions for:

81-112 Peachtree Patio Door Roller Assembly

hello. These top and bottom rollers come out of our sliding doors which are approximately 35 years old. the bottom roller is 1&1/4 in diameter, and the top roller appears to be 1&5/16ths. My mom doesn't remember what brand the sliding glass doors are, she said "maybe peach tree". the top roller look ... (cont.)

This door is 40-50 years old. The channel in 1-1/2" deep and 7/8" wide (extrusion is 1" wide exterior dimension). The door frame is in OK shape, with exception of one of the joining screws, but the wheels are in bad shape. The top rollers are OK, though I would replace them if I could if there is so ... (cont.)

See picture. The sliding glass door is a Citation Glass door

Patio slingding door rollerRoller size : 2 1/4 x 1 1/2Wheel 1 1/4

HelloThe adjustment screw head is damaged and the screw seems to be rusted shut anyway and won't move. So I figured it'll be easier to change the roller.I could not find this model anywhere. I am hoping the pictures can help you help me identify what I need to replace it with.The model I have looks ... (cont.)

I am looking for replacement rollers for my vintage 1983 patio door dimensions are can you help pl awe 1-1/4 inch wheel W 5/8" L 1-7/8

I removed the bottom frame member. It appears that there are no screws attaching the roller assembly to the frame member. It looks like the roller assembly is press fit into the frame member but I don't want to try to force it out until your experts have looked at it. The roller still rolls but the ... (cont.)

adjusting screw is on top \. ole for connecting interlock to bottom moving rail is.5 inch below. tab to hold carriage into bmr is even with adj screwroller is 1.5 x .375. door is approx 25 to 30 yrs old. possibly old Crown door. need 3 wheels.Thanx for your time, Ed

Del Mar Engr "1"...from aluminum sliding patio door...seems to have either a 1.25 inch roller or an 1.125 inch roller...phone is 404-423-1150 (EDT)...btw, what is your return policy if the rollers don't fit?

Need 2 rollers and two of the upper guides To fit PPG herculite K ANSI 7-97. 1-1972 DS -1. OS SGCC - 58 h37

I need to replace some sliding glass door rollers on an old door. Can you help based on these pictures?

Rollers are frozen /worn out and door is VERY difficult to slide

I have a slider that the rollers are worn down and the assembly is loose. Original to my house I suspect. It was built in the late 70s

In search of replacement roller assembly for: Del Mar Long Beach Cal PAT 3.670.357

Would like to know if you carry this if so how much are they and how long does it take to get them

Alum. sliding door roller. Did not see many rollers that are 7/8" thick? I need at least 4 rollers for 2 doors.

Took these out of an old aluminum door. They are marked as del Ray.

Need 2each Del Mar eng

This roller comes from a sliding glass door installed in 1987. There are no markings. 2 11/16 " wide (from widest point), 1 10/16" at narrowest height, 1" depth, roller 1 1/8" diameter. Do you have something that can replace it?

Info on door. Citation Type B- 1605 other info CIT-ALI-CLA which is on a tag inside glass. The handle says Citation Doors. Approx. age of door 2005 -2009. Thanks in advance for any help. I live in a condo assoc. which has 83 of this type of doors. I will pass any info along to others. ... (cont.)