Viewing all customer Discussions for:

81-123 Patio Sliding Door Roller Assembly

1 in wide 1 3/8 in tall 2 3/8 in long

This is the runner of an old sliding door that used to go to a patio and now goes to an extension room ok the house, so interior. There are to of them, single roller each. I've tried finding parts at all of the box stores, but nothing seems to be the right one. please help.

No names or markings on hardware. This came out of a 1960's all aluminum patio door.

It's for a1971 key west mobilehome glass closet hinge 11/4" wheel, has no number on it

Measurements are provided in the pictures to make sure I did them correctly. I measured the "width" at 3/4 of an inch, "height" at slightly over 1 inch and 1/8th, and the width of the single steel ball bearing wheel is 1 and 1/4 inch. Is it possible to upgrade my rollers to double wheels and will ... (cont.)

The body is plastic and the roller is steel

50 year old aluminum door. 1 1/2" rollers remarkably have worn out. Note in photos that axle hole is off center to roller. Door is 3/4" wide and roller has no housing. HELP!

I need 8 of these rollers. Installed in original doors from 1979 1 1/4" Diameter wheel

Trying to find the roller replacement part for my old (circa 60's) glass sliding door. Can't seem to find online anywhere, anything that looks similar. No part number or item information is on the roller piece itself. Only "Ador" markings brand on main door.

Do no thave any model numbers on hardware or doors, so having difficulty identifying these. Do you have a replacement that would work, based on my submitted pictures? These rollers are held in place to the door only by the extended plastic tab, through which one screw goes that also holds together ... (cont.)

The roller on one side has broken as you can see. We removed both rollers and would like to replace them. None of the options on your website look like they are the same. Can you help us? Jan