Viewing all customer Discussions for:

81-129 Diecast Roller, 1-1/2" wheel

Hi, We recently purchased a house built somewhere in the 70/80's - not exactly sure. The sliding doors are hard to open and I'm going to try to fix by replacing the rollers first but I have no idea who manufactured the door - can't find any markings. Any chance you can help with these photos? ... (cont.)

My door is from the 70s don't have any numbers my name is Carlos. I will like to order new rollers if someone there to get in contact with me appreciate

I need a part that will replace this 1981 vintage patio door roller. The wheel is 1.5" diameter.

need this part. no other info

Hi, I'm looking for two wheel assemblies. They look just like 81-129 but have nylon wheels. Inside is marked Southern Cast, Miami Florida. Top and end screw to frame. Likely original to the home built in '68, possibly replaced in '93 when the sun room was added. Thanks, George

1.5 inch roller wheel diameter. All measurements are similar to this product, but wanted to confirm before ordering: DIECAST ROLLER, 1-1/2" WHEEL Product Code: 81-129 Thanks Clay

Could you help me identify a replacement for the pictured roller? The wheel is marked Kilian Toronto CAN Syracuse NY. Thank you.

Older aluminum siding door 48" x 80". Rollers on front and rear

I need a replacement wheels for an older sliding glass door. these are Killian wheels.I need a newer part that will fit this door is possible. Thanks Rick

Approximately 60 years old Killian Toronto Canada Syracuse NY ( on wheel )

I need to replace two rollers on my patio door. The following are the dimensions:2-7/8" total length3/4" width1-3/16" height1-1/4" wheel10-32 machine screw on topPlease let me know if you require any additional information or photos. The wheels are nylon and there are two markings, "970" and "Parlyn ... (cont.)

These are two rollers for an exterior sliding glass door. Need to replace both.

Wheel schematic and picture are attached. They are from an 8 ft wide. Al patio door that is approximately 40-50 yrs old. The existing wheels have an Al frame and 1.5 inch diameter wheels. Need help finding replacement. Nearest i found is your part no 81-002, but that has 1.25 inch diameter wheel, wi ... (cont.)

Looking for a roller like this

I have removed both the anchor and adjustment fasteners from the ends of the door, however the roller acts as if there is another (fastener) anchor possibly on the top of glass edge that prevents removal of the roller assembly? It also appears that the dust seal slots may also interfere with roller ... (cont.)

Looking for this roller Wheel is 1-1/8" OD Overall dimensions is 3" long x 1-1/8 x 13/16" Has single unthreaded mounting hole Building is from early 70's, the hung windows in building have a "GA" on locks, no identifying marks on any of the doors or parts

Old glass patio door, from Grossmans I was told. The wheel itself measures 1 1/8 in diameter. Any help would GREATLY be appreciated. Thanks in advance!

On heavy aluminum sliding door. I last replaced them about 10 years ago.

Two new rollers New weather strip the channel measures 3/8 inch Outside measurements Track cover 6 foot

I am looking for a roller in the style of 81-262 but a bit wider. Mine is maybe 3/4 wide. The main roller wheel is also 1 1/2 when including the plastic guide around it.