Viewing all customer Discussions for:

81-133 Sliding Door Roller, Alcan

I removed this roller from my glass sliding door. There are no markings on the roller or doors. The part is flanged on the outside and slides into a channel in the aluminum channel that frames the door. Do you have a part that will fit. I will need 2 of them. Thank you. Earl

Please identify this part if you can. I can

Greetings, I think my doors are in need of this part. I was wondering if the bearing itself is replaceable, or does the assembly need to be changed out?

Trying to source replacement door roller cartridge for patio doors. Home Depot and Lowes suggested i contact your for replacement, as this style is off "expensive" doors (says HD guy former window contractor). The rollers are single wheel with a spring-loaded guide at front of cartridge. Lengt ... (cont.)

I have a Norandex-Reynold sliding glass door and am wanting to know what type rollers it takes. The warranty label has the following information: 105 408-Norandez-Reynold VP08301 3 735518-001 Another label has the following information: Seg 11-012-013 Type DDSG Code PRD-K-

Hi, We have three-part Alcan sliding glass doors, super-heavy. Handyman measured the wheels at 1-5/8". I'd like to order six replacements; also need six new screws to hold them in place. Don't know the make or model on the door, only that there is a black plastic Alcan logo on the top side edge of ... (cont.)

I have a house that was built around 1960 with a 4-section patio door spanning 20'. The 2 moving sections haven't really worked well since I bought it about 3 years ago. I took one of the doors off and saw that the small gears of the aluminum ratcheting mechanism are worn out, preventing me from adj ... (cont.)

need to find the attached roller or something that can replace it. the wheel is about 2.5

Would like to buy replacement roller cartridge for our sliding glass doors. I cannot determine which replacement to buy. Apparently, I have to disassemble the door to remove the old roller. Can you assist. Present rollers are Nylon (1-11/16" x 3/4" wide).

PLEASE HELP ME WITH PRICE AND AVAILABILITY ON THE FOLLOWING ALCAN PRODUCTS 80167-800193-Kunststofflaufrolle -Plastic roller-Alcan 80165-800192-Kunststofflaufrolle -Plastic roller-Alcan

I recently replaced the rollers on my 40 year old sliding glass door with this part: Sliding Door Roller, Alcan Product Code: 81-133. The nylon track cleaner rattles, making quite a bit of noise. Is this normal? What should I look for if this is not normal? Thank you.

I am looking for replacement rollers for Norandex Sliding Glass Doors, Production Series 500/501, Production Control #'s 96-0131-10 & 96-0608-20. Can you help?

This roller looks like the 81-133 except the 81-133 has a track cleaner that looks like it adjusts up and down and mine does not have a track cleaner. the other measurements are the same. will the 81-133 work?

This wheel housing was pulled from a sliding glass door. The wheel thickness is 3/8" thick, diameter 1 3/4". Unfortunately the wheel is frozen yet I can make out the words "MIAM???? ??? S Engineering Corp" on the side of the wheel. I'm not sure how many letters are covered by the metal wheel h ... (cont.)

I have a doorwall that the bearing are falling out of and i need to replace them... They look like they are riveted in place. The rollers measure 1.5" in diameter and are Nylon. I am not sure what brand the doorwall is, there are no names on it or the glass. The house was built in 2005. ... (cont.)

The patio doors are becoming difficult to move, I need to find replacement rollers. The doors were made by Alcan and fitted in the late 1970's! they've lasted well and it would be good to get them to last a little longer. I can see no marks on the doors to help identify. I would be grateful to know ... (cont.)

I only see one screw in picture, and am assuming this is a set screw. Does this part also have an adjusting screw for raising/lowering wheel? Is so, is it located directed below set screw? The Alcan roller(s) I

I am trying to find a replacement roller assembly for my sliding glass door since one of them rusted and broke. I got the following information from a sticker located inside the door frame. Simonton Windows Series 600-500 SGD (I think, it is kind of smudged) SGD-R45-72x80 Thank you. ... (cont.)

Hi...do you have this roller? I need 2. Let me know. Thanks, Grant

A label I can partially read on our sliding glass shows Norandex,Inc., but I cant make out a part number. So, do these parts match any of your inventory.