Viewing all customer Discussions for:

82-002 Sliding Door Handle Set, 6-5/8"

Need replacement hardware; interior handle hardware and handle, exterior handle

Hi. I need to replace this slider door pull. One half says DNS 12 Inside Pull Standard, and one says DNS 13/23 Outside Pull Standard.

This is the sliding door lock I want to buy. Please help. The part number I read on it is NW1720-2

I need a replacement handle/latch for this sliding glass door

Needed a replacement lock for my door. I also am not sure of the model number or manufacture of door. It is a 107X80 brown aluminum door. I was also looking for the rollers!

Fracture of inside plate which locks and unlocks the mechanism Or a complete new fitting of the same dimensions to fit into the door If you can suggest or help I would be most grateful Thank you

PURCHASED A CYLINDER LOCK FOR THIS COMMING TODAY BUT SEE THE FRONT PLATE IS HEAVLY SCRATCH WOULD YOU HAVE A REPLACMENT? IT HAS A # J302B1 ON IT. The rear locking back plate is ok it has JHL ON IT.

Good afternoon, I need to replace the lock on the Sliding Glass door. It is 27 years old, made by MI Windows and Doors and they advised they don't carry replacement parts for my door any longer and provided me with your website. Series: M 11 MST: 4'0 x 6'8"

looking for a SGD handle/lock replacement associated with included pictures. House was built in 2002.

WINCORE SGD-R30 500 Series. I need, all or as many as possible, part numbers for this sliding glass door that was brand new in 1989. I cannot take the door off until I have the rollers or possible rollers due to a very ill patron. Most importantly I need to replace the top and bottom bolts, screws, ... (cont.)

Outside pull labeled DNS INDUSTRIES 13/23 OUTSIDE PULL STANDARD Inside pull labeled DNS INDUSTRIES 16 INSIDE PULL STANDARD I know DNS is no longer in business, do you have anything that will fit?

Mechanism of Patio Door Handle not functioning and cannot lock Patio Door. Patio Door Hole opening size = 7 1/8" x 3/4" Location of lock opening = 1 5/8"-2 5/8" from bottom of opening Says Reliance 1977 on metal of both halves of mechanism

I have this glass sliding door with a handle I need top get replaced. I see 58/91 on one piece and 58/94 on another. From top to bottom it is 7" 5/16. The width of the door is 1" 3/16. I would like to have a system that locks and has a handle. Can you help me out!?

Looking for a patio door handle set. Old parts are not available. Opening is 3/4" x 7 1/8" by 1" deep. Old handle set on the frame and bolted from inside to out to secure with two screws.

I need a replacement for a broken latch on a Guardian sliding glass door. Please advise if you have a replacement latch and ordering information.

This part is on my triple slider on the right hand side opening from right to left to go out it seems that the top piece with the screw goes in for some reason as you pull the door open and close it by using the handle the screw where is attached to your part keeps breaking and this is now I bought ... (cont.)

The lock for my sliding door stopped working. When I took it off to look at it some parts fell down inside the door. I am trying to replace it if possible. I have sent some pics of the handle. Thanks in advance.

23/13 Japan 2 Woodbine Ind Ltd

I purchased a wood pull part number 88-001 and sliding door keyed handle set 82-008K. It appears that the locking peace which extends to the keeper is higher than the existing hole on the door and the keeper is positioned down. In addition there was no instructions. I have attached photos of ... (cont.)

I have a sliding glass door. The handle and the hardware is broken. Specifically, the portion where the top screw is inserted -- in the metal hardware that's in the frame of the sliding glass door -- is stripped. I'm interested in replacing all components -- the handle and the inner and out metal h ... (cont.)