Viewing all customer Discussions for:

82-033 Patio Glass Door Handle Set, 3-15/16"

Looking for replacement outside handle for Hurd patio door, installed 2002. Measurements are; width 15/16", height 6 1/4", mounting screw width, about 4". Thanks!

I have a SEMCO wood sliding patio door. The OEM replacement is SEMCO SS101, but I only need the handle set because I’ve already replaced the mortise hook lock. The mounting holes are 3-15/16” center-to-center. I’m looking for an equivalent or compatible replacement instead of purch ... (cont.)

the two handle and lock parts as well as the inside lock thing which was taken out by my locksmith.

I am looking for a replacement hardware for my patio door. I don't see any markings on the brand but on the inside of the exterior pull it does say FPL Door Lock and then two letters I can't make out and the number 19. Can you help identify the part.

What is the measurement of how far out the handle is from face of door. I am looking for a replacement handle with minimum width (how far it sticks out from the door)

Surface mount with stainless in door latch mechanism. 3 15/16" handle screw spacing 3 1/2" latch screw spacing

I need the handle and interior mechanism and the latch that is mounted on the frame as well. I don't have any idea of brand

Hi I have several of these doors; one of the handles has broken on the exterior; the portion connecting the wooden part to the black plate against the door has snapped - it is a purely exterior break, not involving any parts internal to the latch or lock. I do not see any part numbers anywhere and ... (cont.)

Finding replacement lock for sliding door. following info on the handle. Canadian patient no.919213 patiented 1973 Pat. no.3596954

Hello, Can you assist me in finding a replacement handle? I've uploaded all of the measurements for the existing handle and keeper. Thank you kindly Robert

7.25 long and 4 inches from the middle of the screw hole to the next

Looking for a replacement part for latch

Need to replace above for back sliding glass door, home purchased back in 2007.Please let me know if you have it or when can I obtain it at.Thank you

Door handle replacement

Looking for replacement.

Looking for a replacement. Interior side the metal is cracked in half.I believe this is a Marvin door but not sure its from 1994.The screw spread is 3 15/16".

Need Handle set Thanks.

The plate split just below the bottom screw. We'd like to replace it with something similar. Handle = 9"Installation holes = 3 15/16"The broken plate is approximately 4 5/8" The rest of the mechnism seems to be working properly, but we would consider replacing that too if recommended. Thanks! Tom Ke ... (cont.)

Hello ..Hi what parts do I need the inside handle that unlocks the door needs to be replaced.. or replace everything is ok the mortise part is --3 5/8 top screw hole to bottom screw hole width 5/8 hipe you can help David

hi! i have been trying to find a replacement for this door, i was able to find the handle that is pretty close to it (82-063) but that is an inch too short and i am needing a 7"