Viewing all customer Discussions for:

82-037 Andersen Reachout Deadlock Assembly, 2-Panel

WIN # PSGPD - TTTT - L Prod Id 2686005 00001-121-100081-030807-08-1423 Anderson 6'- 0 x 6' - 10 3 8 Sliding Door

Lock mechanism broke on my old sliding door.

Interested in securing a replacement lock for the above subject, or in the alternative, a substitute for the same, preferably white.

looking for a specific strike or latch plate for a slider. this type has a point that presses a button on the latch(part in door) if it doesn't engage the button the latch wont operate. Any help would be greatly appreciated

Second type.Aloha,Josh

Andersen sliding door handle broke. House built in 1997. Tribeca looks correct but wanted to verify mortise and latch needed

I have enclosed a lot of pictures. My latch easily pulls out after removing the two screws. My screws go through the latch and are secured into the wod core of the door. It looks like the existing holes can be used to drill through the rest of the door and new longer screws could hold the locking me ... (cont.)

broken anderston sliding door latch receiver

Mortise Lock, Round FaceProduct Code: 82-263I think..!The owner lost the part of the frame I think the adapter for latch

The pin on the jamb side has broken off and no longer allows the door to lock. There is a button on the door side that must be depressed by the pin to operate the latch mechanism.

lockset needs replacing...can you try to identify?

this is the deadlock and receiver on the door16cfr1201 ll CTG tempered sliding glass door sgcc-1805-5/32u

Hello - i have an old Pella sliding door that i was hoping to get new hardware for. Inside lock is separate from the handle. Pictures attached. Would prefer in brushed nickel vs. brass. Thank you, Joe

Hi, this is an Andersen sliding door thumb latch lock receiver. I'm looking for this exact part not the lock itself. I believe there's a picture of the same part on this post above. Thank you Sam

I am not sure if my door is an Andersen. I installed this 2006 and cannot Find any identifying company name or logo on door or parts. I need to replace the ENTIRE hardware. The previous tenant lost the keys and mangled the lock. I would like to have all new hardware.

Both mortise lock and thumb latch have AW logo. Mortise lock has two numbers 2573558 and 7700-14. Thumb latch has three numbers 71258-3, S2573983 and W2573554. See photo. Tom

Please advise if you have the correct replacement for the Anderson sliding glass door, patio door lock assembly?Thank you Paul

I am looking to replace the thing latch and lock and mortise on a set of Anderson gliding doors. I believe the doors are the Yuma model and we're most likely installed in 1989 or somewhere close to that. The label on the doors has 2565025-0001-121-100081-111805-12-9868 listed as the product ID num ... (cont.)

Need lock for sliding door

I've been trying to find this part & with no luck . I posted this here before & couldn't find anything about it. If anyone could help me find this part would be great. Thanks a lot.