Viewing all customer Discussions for:

84-016 Screen Door Roller, 1-1/4" Dia Nylon

I need 4 of these. please provide feedback if you have them available one has the number stamped into it 24 the other 21 ,the other 18 and the other 17 steve

I need 4 patio screen door rollers included you will find an attachment with measurements if you have any questions please contact me I hope that we will be able to find the ones we need. my name is Alfred my telephone number is 219-487-9688. Thank you.

Finding a lot of replacement parts with a solid attachment point. This one is more of a hook. any ideas?

My screen door uses the same wheel as your part number 84-016. I have ordered several of these as replacements. Is there a comparable part where the center insert is made of metal instead of nylon? The nylon center "bearing" (for lack of a better description) keeps breaking. Is there a more rugged b ... (cont.)

How do I get the old roller assembly out of the screen door frame? The only screws are the adjustment screws. The assembly is anchored on what appears to be an eye bolt with a pin thru the middle extending out both side of the holes in the bracket behind the wheel.

see the image attached

I need new screen door tension spring/roller units for a sliding door. I assume it is a Certaintee door unit because the house has Certaintee 400 series windows throughout. The sliding screen door has a very thin tension spring/roller unit that I have not been able to find locally, even at a large ... (cont.)

Attached is a photo of the rigid black plastic corner piece for which I am searching. The product tag in the photo comes from a different size Milgard screen door - slightly wider and shorter but same purchase date - hope it is helpful anyway. Someone inadvertently kicked the screen slider corner ... (cont.)

just looking for replacement parts for this trying to find out who makes and is it available

Hi, the pictures are for the rollers on my SGD screen door- they have broken (the attachment posts on the adjusting block broke)- I am looking for a much sturdier roller that I could use for this door - the door opening for the roller is 3"x3/8". Also, my door has two rollers on both top and bott ... (cont.)

::::: 1200 series Dorwal model Acorn system ::::: I do not see that you offer a roller sub-assembly for the 95-020 corner, however, could you recommend a replacement full assembly?

Part number 84-016. I am having the hardest time trying to get this roller connected to the corner bracket. I'm supposed to use a circular arc motion to get the two holes on the end of the roller into the ears of the corner bracket. The instructions say this is an easy installation but it is far fro ... (cont.)

I was informed by Menards that Jeld-Wen doesn't sell parts and stumbled across your website. The roller I have is metal instead of plastic, but the shaft (plastic) ears that catch on the roller assembly have worn out. 1) will this replacement work 2) can I just get the plastic shaft inserts? The ... (cont.)

Hello, can you please tell me how to remove the old broken patio sliding screen corner insert (which was plastic) and install the new metal one. I examine the frame and found no clue how i may remove the plastic corner insert. No screw, no indent, no whatsoever

I am looking for a Peachtree patio screen door roller and am having no luck finding one like in the inclosed image. Can you help? I would like four of them. Thanks. Randy

Need help to find/replace this insert assembly for a sliding screen door that came with 5800 series American Craftsman 'Silver Line' patio door from Home Depot. Need 4, door is reversible, same top & bottom. Photo 650 shows whole assembly. 653 depth 1.125", width? 14/32? was a tight fit, had to pry ... (cont.)

Swisco makes a 1.25" nylon screen door roller product code 84-016. Does Swisco make any of the following variations of this part? 1. with a 1" nylon roller 2. with a 1" metal roller 3. it must fit in a 1/4" space Thank you

My rollers look somewhat like 84-016 but it doesn't have the thin L shaped thing sticking out on top. Instead it has a flat tension strip that is an inch and a half by one quarter inch that keeps it tucked on. I don't know how to remove it from the screen door so I can take a picture of it. There ... (cont.)

I recently purchased 4 rollers assemblies from you, however when I received them, the roller is 1 1/4". Product code 84-016 The roller on mine is 7/8" in diameter. Do you carry another size wheel or did mine wear out that much? The metal piece and spring are exactly the same on both new and old ... (cont.)

I need to replace a broken screen door roller for a Kinro screen door. Your company offers two rollers that appear to be very similar to my broken part. 84-016 provides all dimensions and sells for $#.## 84-101 does not provide any dimensions and sells for more at $#.##, a significant difference ... (cont.)