Viewing all customer Discussions for:

84-050 Patio Screen Roller, Pacesetter

I need bottom roller unit for screen door. I looked for piece on your web site couldn't find one like it. Its all plastic 7/8 roller on one end on the other end there are 2 screws 1 bolts to the door the other attaches to a wedge that adjusts wheel. Wheel is 3/16 wide unit is 2" long ... (cont.)

Please help. I recently purchased four screen door rollers. Your item number 84-050. I was excited to be able to final find what I was hoping were replacement rollers for my screen slider. My issue is the thickness of these rollers. They are exactly the same as my old ones except thickness. My door ... (cont.)

Hello, the wheel diameter is 1 inch the overall width of the part is just under 1/2" (length of the wheel axle) wheel thickness is .250 inch the mounting screw goes into the side of the door.

Screen door roller. My guess is that it dates from 1994 when the house was built

Is this product available in stainless steel or brass? This is for a marine saltwater application 81-090 Do you also have parts like the attaced images? The part with concave roller is about 7/8" w x 3/8" d x 1 15/16" tall and the roller is 7/8" in diameter. And the other smaller roller is ab ... (cont.)

I recently bought twenty 84-050 rollers for use by my condo owners from your company.I need help with their installation..My screen used four rollers. I don't understand why the rollers have two positions(closed and opened)for starters. Second I need some instructions on how to install them.Thanks, ... (cont.)

roller has the markings "Kilian Sryacuse New York". Need 4 of the roller systems. Do you have?

I need to replace two of these and cannot identify the manufacturer of the door.Maybe 84-050? These are from 8' tall doors.

The pictures I sent seem to be the same as your product code 84-050 if your picture is when fully closed. Dimensions are the same. I am looking for steel wheels since my nylon wheels all have broken. Let me know if your product code 84-050 is what I need. Thanks Scott

The width of your 84-050 screen roller is listed as 0.5" - does that include the pivot rivet? Thanks!

Got these off neighbours' door, and tried to fix. Wheels are worn down so no go. Body part 1 1/2" long x 3/4" wide x 5/16" deep. Spring loaded wheel part is 1 1/2" long x 7/8" wide x 9/16" deep at wheel, it is crimped to 1/4" to fit inside the body part. I can see no names or numbers on the part, no ... (cont.)

Our screen door is 9 yrs old, the plastic wheels have broken. The local window shop has switched them with the top wheels, but I would like to replace all the rollers and have back up parts. Can you advise me from the picture attached if the 84-050 looks to be the correct part? Thank you. ... (cont.)

I used the photos below and my best guess to order four patio screen rollers, 84-050 Pacesetter, to replace the rollers in my daughter's no-name sliding screen patio door. The Design is very close, but the width of the roller was too great. Tht is, the part of the roller with the adjusting bolt an ... (cont.)

Does the attached pic give enough info to find a rplcmt roller assembly? It measures 3/8"-- Product code 84-007 Sliding screen door roller assembly. I will need 8 rollers (2 screen doors w/4 rollers for each door). Any advice/info is appreciated. Gordon

I bought some new rollers from swisco and they are slightly different than the ones I'm replacing. I was wondering if your company carried the one I'm trying to replace. Please see the enclosed picture which shows the one I bought from swisco and the one I'm trying to replace. Thanks, Scott ... (cont.)

I need to replace the rollers on the patio screen door and measured the roller, the wheel is 1 inch by a quarter inch wide at the back of the bracket and the length of the bracket is about 2 1/2 inches long. I have submitted a couple of pictures and hope you can help. It looks like the moss patio ro ... (cont.)

I want to replace lower door roller assemblies that look very similar to part #81-090, but my assembly has a plastic rather than metal roller. Do you any parts like 81-090 that have plastic rollers? Also I am looking for a top roller to replace the one pictured below. do you have such units? Than ... (cont.)

The moss patio door roller #84-095 is exactly what I am looking for except I need one 1/2 inch wide not 1/4 inch as is #84-095. Do you have these?