Viewing all customer Discussions for:

84-050 Patio Screen Roller, Pacesetter

Need roller

Here are my screen door rollers I need to replace... Please refer correct part number - thanks Barry

I purchased parts 84-050, 84-075, and 84-09 but they did not work. The case is 1/2" wide and 1/8" long. Are you able to recommend a replacement?

4 per sliding screen door.

Looking for replacement

Hi I have searched all of my local hardware stores, Swisco, and other online sources, and cannot find any rollers that look similar to mine. I had a difficult time removing them, and cannot tell exactly how they were held in place. But. there are two funny little "spikes" on either side of the rol ... (cont.)

Screen door wheel for 3/8" track

We are looking for these wheels for a sliding patio screen door. this screen door is 34 years old and all the wheels are worn out. We have three of these doors so have no idea who the manufacturer is. All we know is that there are four of these to a door, two on the top and two on the bottom of ... (cont.)

Need a bunch of these. for my screen doors.

I ordered and received 84-007. They are just a bit too thick for my application, so that they will not slide into the door frame. That attached pictures give a pretty good comparison. My measured thickness is about 9/32" to 5/16". My rollers are 15/16" to 1" o.d.What item number do you recommend?May ... (cont.)

I have two part for my sliding screen door. One is locking latch and other is the roller hardware.

Looking for new wheels for patio screen doors.

I'm in need of some new adjustment rollers

i ordered part #84-050 and 84-050N but the side with the screw on it that attaches to the frame of the door is too wide. the one in the pictures is what i need. that is the last original roller that i have and i am going to need a large quantity when i find the proper size. The plastic roller on th ... (cont.)

I wanted to replace the worn roller for my 2 screen doors but could not find it anywhere. It is a steel ball bearing 13/16" in diameter roller. I bought one from your Company item #84-095 four years ago, and it does not fit in the slot (hope I could return it). I put it aside and wanted to fix the s ... (cont.)

Do you folks carry this part and is the a mfg name for it? Thanks

Do you think I would be better off with the moss roller or the pacesetter (84-050). The width of the current roller is 3/8in. The moss roller seems to be a bit narrower than the pacesetter. The overall width of the bottom of the door is 5/8 in but the frame thickness would make a 1/2 roller a ti ... (cont.)

The only # / letter I see is: SAL 'S HD

Screen door is at least 20 years old. Wheel diameter: 1"t Length from wheel to flange: 2" Height" 1 7/8" bottom to top of flange

Let me know if the roller can be identified from these pics -- thank you!