Viewing all customer Discussions for:

84-506 #8 x 1-5/8" SS Adjusting Screw

Need four rollers. No manufacturer, SN or other identifying marks.The door may be as old as 20 years. Thank you very much. Opening for roller mechanism: 2 3/4 inches Roller diameter: 1 inch Roller with metal housing width: 1 3/4 inches Roller with metal housing height : 1 1/8 inches Roller with me ... (cont.)

screen says jayco on the handle.

Hello, I have an aluminum patio door w/aluminum screen. It is in Hawaii on a northerly shore, the door facing east to the predominant weather, & the intense rain & salt-water air has corroded the screen roller metal track at bottom. We pounded in place atop the existing track an extender tra ... (cont.)

I ordered the replacement part 84-030 for my screen door and it did not come with a screw. The old screws are too corroded to reuse, and one of them I actually had to break in order to get the old wheel apparatus out of the door frame. Can anyone tell me the exact size of the replacement screw, pict ... (cont.)

Hello, I have a few traditional aluminum frame screen doors at a rental property that are continuously requiring adjustment and/or reinstalling. Sorry I don't have photos and can't get any for a couple of weeks so I'll have to describe the situation. The sliding door opening is 12 feet with a pai ... (cont.)

The 84-031 looks like a perfect match for the current rollers in our screen door but we also need replacement adjustment screws and nylon grommets that hold the spring in place and provide the threading for the adjustment screw. Do you sell these and/or know of someone who does?

No markings. Wheel is about 7/8 inch in diameter. About 4 inches total length. Same wheels, 2 on top and 2 on bottom. Metal with ball bearings.

Been in the business for 18 years and have never seen a roller like this

Having hard time trying to replace these tension bolts, l have one and need 8 total so l need to find 7 more. Measuring it looks like it's 1 and 2 or 3 inches, can't find at any of the hardware stores here.

Two are missing (from bottom of door) One is unattached, the other is still in place but I cannot get it out, even with screws removed. It appears to be a 84-005M or 84-102, but since there is no bar attached to the one that is loose, it is anybody's guess what it might be. And since I cannot remove ... (cont.)

Do you have this roller? I didn't see it. I see a similar one, but none with grove on metal piece.

What is the thread pitch of this screw?

I need a set of four adjusting screws for my United sliding screen door. A picture of one of the screws and the door info label are attached. The overall length of the screw is 1.5". It appears to be slightly smaller than a #8, with a thread pitch slightly higher than 16 (perhaps 18). ... (cont.)

I am getting ready to order several replacement parts for an older Malta window. They use your part, Pivot Shoe 15-159, to attach the sash to the balance string. However, I need to purchase a couple other parts that are broken. 1. The clip which attaches the spring to the bottom of the vinyl s ... (cont.)

Do you have the screw for the Center pivot shoe for a Malta double hung, tilt-in sash window. It fits into part 15-159.

I lost most of the screws that I had to adjust the rollers on screen doors. I think the original doors were from Caradco Do you have anything like this?

Missing the adjuster screw on the bottom roller on my patio screen door. Found the owners manual with the above door models for the patio door. Don't see any info on the screen door though.All I am missing is the longer black screw. (tool one out of the other end of door). Any help would be appreci ... (cont.)

Attention Please, Can you please tell me if you all have the adjustment screw (sliding patio door wheel) in the attached photos? The screw I need looks very similar to your 84-502 and 84-506, though the 506 has more thread lines per inch then the one I need. The screw I need appears to be a #8 ... (cont.)

Got a new problem with patio screen doors with outdated hardware, but you have them. Screen Door Bottom Roller, 1" Nylon Concave Product Code: 84-053 is exactly what I am looking for and requiring 8 for two doors I also see there is an adjustment screw recommended and don

I have an older (25 yrs) "The Atrium Door" brand screen door that has a broken nylon adjuster lever (internal to the door) and broken spring wheel. I think I found the steel wheel in the 84-006S, but I don't see a replacement adjuster assembly. From the products on your website, it looks like I ... (cont.)