Viewing all customer Discussions for:

86-012 Andersen Top Tension Spring

Hello, I have an aluminum patio door w/aluminum screen. It is in Hawaii on a northerly shore, the door facing east to the predominant weather, & the intense rain & salt-water air has corroded the screen roller metal track at bottom. We pounded in place atop the existing track an extender tra ... (cont.)

we have a customer with an older Anderson patio door that is hard to open and close.they are right on the beach, and we think the rollers need to be replaced.

Hello, I have a few traditional aluminum frame screen doors at a rental property that are continuously requiring adjustment and/or reinstalling. Sorry I don't have photos and can't get any for a couple of weeks so I'll have to describe the situation. The sliding door opening is 12 feet with a pai ... (cont.)

Looking for Wheels and tension springs. Please let me know if you carry them

I need a 4 inch tension spring similar to your3 inch spring Model 70-011.Would appreciate any help you can provide.Floyd

My screen doors were installed in a house I have outside the USA, approximately in 1992. Could you please tell me how to describe my order.Thank you.Antonieta

Hello:We have an Anderson sliding screen door PD3068 size 35 1/2" x 77 1/4". We have to remove the top tension spring because it makes the door stuck on one spot, even the spring fits well on the designate slots. I think the metal of the springs are too stiff. We like to put the tension springs ba ... (cont.)

I have a sliding screen door, unsure of manufacture, that needs two new rollers on the top of the door. There are two sets of holes on the top that are 4 1/2" apart that I assume are for the rollers? Would you have any idea what part would work for this? Sorry about the limited information. Thank Yo ... (cont.)

Need metal strips that act as springs on top of sliding screen door to hold door in track.

I am missing one of these springs. It clips in the top of my sliding screen door and runs inside a tract. It is 4 1/8 inches long. The door is between 25 and 30 years old.

Can you replace this shutter and wood screen hardware?

Can't find a tension spring with a Gide on top

We were told you might have replacement parts for our generic sliding doors? The wheels and the springs, as well as the door hankdles are missing this spring Our door handles are 4 inches long Our width of slider is 5/8 inch

i am looking part #86 012 with a dimention 4 1/8 my holes on my door measure 4 1/2 center will this part fit ? my door has the same # as the door # of cig3 4 - 89 igcc cba

Having trouble with screen door jamming and jumping off the tracks.replaced lower wheels they seem ok. holes on upper tension springs are egged . can tension springs be replaced with wheels is there some sort of kit. what do I need to correct this. also the upper plastic trac is cracked ... (cont.)

the main sliding door is a anderson, one of the rollers is riveted the other has two screws

4" long screen tension clips.

My window screens are setup with the 4 plastic tabs that are always breaking. How can I retrofit this top tension and possibly a leaf spring into the frame of the screen ? I was thinking a drill and a rivet set might be easiest but was curious as to what you would recommend. Many thanks ! ... (cont.)

I am looking for tension springs for my screen doors. Patio door is CIG-3 4-89 IGCC CBA. High performance. Do u carry these?

How far does that spring stick up? I need tension springs for alum. sliding doors. They need to stick up about 5/8 - 3/4 inches.