Viewing all customer Discussions for:

87-058 Window Roller BB Wheel, 9/16" dia.

Name on latch: Prime windo part is 21/32" wide. End piece us 7/8' high and 15/16" wide. Body of piece is 11/16" high, not including roller. All nylon, flat roller. Screw hole is 3/4" from base of end piece.

I need a window roller assembly and the bottom rail is damaged

I appreciate any help or advice you may have to offer.I measured the lowermost/widest point as it sits in the window at5/8".The height with the roller is13/16".I'll take anything close.ThanksJay

Attached pictures show a window located in a Florida sun room which had rollers but they have all deteriorated and no rollers now exist. We bought this property 1 year ago and don't have any information on the manufacturer of the windows which may be 40 years old. The size of the opening is 5/8" w ... (cont.)

Dear Sir or Ms:I have capital brand metal sliding windows and need some replacement rollers. I attached a couple photos of my rollers. They measure 1/2" wide X 1/2" high X 1 -1/4" long(length isn't important) The brass wheel is "1/2 in diameter. Do you have any rollers that are close to these dimens ... (cont.)

Hope you can help...pictures attached...also very important that the diameter of the axle is 1/4". Have not had any luck finding these. Thank you!

Hey there, I'm looking for a sliding window roller very similar to the 87-193 in your catalog. I don't have a photo of the assembly but it's basically the same as the photo of the 87-193. The only difference is the wheel I need is 5/8" in diameter and the axle is 7/32" in diameter. any ideas? ... (cont.)

No manufacturer nor markings available. I am a condominium owner and like to be a handy person. This roller seems to be the STB type. I don't know what that stands for. Do you? The dimensions of this roller are described in the table on both pages. The diagram is one which I f

I was wondering if you carry a roller clip as shown. It clips to the top of a window balance. If you do not have this, do you have any ideas what this particular part will be called?

I am looking for a sliding window wheel replacement part. It is similar to product 87-058. I am attaching photos for clarification. Any help you can provide is greatly appreciated.

Part No. SWR 52

Could you ident this roller. Pics attached

Hello: Do have this type of roller? We are doing work on a building that has Acorn windows and this is the type of roller they have for their sliding windows. Would you please quote on these rollers. Thanking you in advance. Darren

Hello, We are in the midst of developing a new slider window. We received some sample rollers from you (Part# 87-058), but we believe the housing we used came from elsewhere. I went to your website and noticed the acorn sliding window 9/16

I am sending you a sample of the window rollers that I have on my NUPRIME Season All windows on my porch. The only number I can find is on the window. This is a patent # - 3449-862-0209 812-0 213676. I'm not sure how old the windows are. I think they may have been installed in the 90's. ... (cont.)

Wondering if your pn 87-141 or 87-099 will work as a replacement for this part

Length 1 1/8 Width 3/4 Height 1/2

Each window has 2 sections which slide open. Each window has 2 of these rollers for a total of 4 per window. This is the only data that is readable: series 2500, b2-hp-70/hs-a2-hp-65, ETL Sponsered

Is the ball bearing wheel available separately from the nylon housing for the 87-061? 5/8 diameter x 1/4 wide wheel with 1/4 axle 1/2 inch long.