Viewing all customer Discussions for:

90-110 Face Mount Burnished Bronze Keeper, 1"

Can you tell me what part to order to replace the one with the number on it?

for double hung window in a college

I have some older ALCAN windows that I think are called sash style. The top window is stationary & the bottom window slides up over the top. Most of the locks need to be replaced. The look very similar to your 90-180 but brown with 2 1/4 hole spacing. The keeper mounts a little different than your 9 ... (cont.)

9659 LF 1 on the keeper LF 9208 8203 R 01 on lock Ab9202

One of the posts that is welded to the window frame for a Living brand window lock broke, and the latch won't lock. Is there a part for this that I can jb weld onto the frame?

8). #2620 channel balances. 26 3/8"10). #1820.channel balance. 19" 4). #2420 channel balances. 25". 4). 90-042 NuPrime Window Sweep 36) 18-110 NuPrime SeasonAllFour windows with #2620 channel balances have balances on left side only - two windows with #1820 stamped balances have one on ea ... (cont.)

Hi there, do you think you might have this part??? Please advise, thank you, Donna

where I can purchase the above Alenco cam lock.

Side sliding windows. Metal latch broken 1 1/16th inch by 2 inches (photo of unbroken latch on window and photo of broken latch removed from window)

Update we took it apart for better identification we have tilt windows and need replacement parts

I need just 1 keeper, 1.5 inches long, 1.0 inch wide, holes are 1.0 inch apart and 3/16 inches from back (long) edge

I need to replace the face mount keeper for my Swisco white vinyl window. The part number on the back of the existing keeper is #680111. Screws are 1" on center. Height from top of keeper to bottom of keeper is 7/16". Width of the bottom is 1 1/2". Windows were installed 2006. Do you have ... (cont.)

I am looking for this alcan window sweep lock keeper. Would you have one? Thank you Judy Dean

I can't find this part anywhere and am not getting emails back from Prime Window Systems when trying to contact them directly. I have several of these broken in my home and need to replace them so the windows lock properly. Can you help find this part? Thanks!

Need to find a suitable replacement, thank you for your help!

I need latches for 3 windows. The attached photos show the only markings on the windows.

I bought item # 90-300 face mount keeper and sash lock for double hung vinyl windows that were on house when I bought it 3 yrs ago. The face mount keeper that came with lock is too long which means it sets up too high to catch locking mechanism. I need a keeper that is 1 inch high with holes that ar ... (cont.)

Looking for Keepers as shown. I hope you can help.thanks, Franco

1.5" Wide. Need keep only to sash lock. The sweep still works fine. Can not find exact match online. Numbers on the keep are 9659 4.

I found one on your site (90-257) but i would have to modify it if i have to. It doesn't show the total width. Would like to fond correct one if possible.I am a contractor/homeowner