Viewing all customer Discussions for:

90-161 Window Lock & Keeper, 2-1/16"

On a window wizards window installed in 1995. Only marking is on the cam, and it says 3212. Overall length of this is 6.6 cm. Cam thrust outside housing is 0.6 cm. Sorry for metric dimensions, but my micrometer is metric instead of standard.

Could you please tell me if you have the replacement part for this. Thanks, Debby

I have Schuco windows installed in approximately 2005. Schuco is a German maker of windows that abandoned the US market after the 2008 housing crisis. The holes are spaced exactly 2 inches apart.

I have this broken vinyl window lock. The home was built in 2022. I cannot find ANY match to this online. The space of the latch seems 2 1/16 " but the static keeper portion seems bigger even though they are a match. The bottom of the latch says 2102 and has no lother markings. I have 2 broken and n ... (cont.)

I am looking for a replacement lock like this one.

I have many of these that look like the pics. Some screws are missing or loose or broke. So do replacement locks like these come with over size screws to fit snug in old hole or probably same size. In either case I could use a few. thanks

Hi As above, I need replacement sweeplock that is 2 1/8" and 3/8 from edge. It locks into a face mount that has holes 3/4" apart. Can you help me out? Thank you so much and best regards. Lu

MARKINGS INSIDE ARE 677, 12, 9, PAT PENDI HOPE THIS HELPSTHANK YOU MIKE

I need three parts total. The left coil spring is broke took picture of right intacted. The I need the two spring loaded parts on top of the sash that you retract to pull the top of the tip out. The left and right side are both broke. This is the inside sash on the bottom. Client believes about 20 ... (cont.)

I need replacement window latches for American Craftsman series 8500 double hung windows. Picture attached. John

Hello: a window repair company looked at my windows and gave me a quote way out of my budget. I need 3 pair of these (pictures included - beige) tilt latch actuators - 2" long, 7/8" wide. 1/4" deep teeth, 3/8 teeth width. I also need one beige: 90 - 161 - SW lock and keeper but if not beige whi ... (cont.)

The rectangular lock holder has a number 33stamped on it. 33 are needed. The lock or latch has a #4 stamped on it. 33 each are needed. Take out clips 46 ea are needed. 34 size 21" balancers are needed. 20 size 15" balancers are needed. 116 #8x counter sink stainless steel Philip head screws are nee ... (cont.)

I'm currently trying to refinish all the windows in a cabin I'm renovating. I would like to replace any damaged parts using your website. I can't seem to find any information on brand or model of these windows and would appreciate your help in identifying them. Thanks in advance Justin ... (cont.)

Lock for window sash

I am trying to find replacement window locks and Keeps for my home

Unfortunately I don't see any names or numbers. I want to replace my sash locks on 11 windows (11 X2= 22 locks).

Need 1 window latch for MI double hung window. Manufacturer is: "MI Windows and Doors". Our house was built in 2017. The latch color is "Clay". The metal part of latch has "L 3" embossed. Please see attached pictures.

I have several windows where the balance shoe is broken and when the windows tip in they have to be held in place by hand so I need to replace those parts. I can' find any part numbers on anything except img_1220

We have a strange one here: any help would be greatly appreciated. Overall width of lock is 2 13/16" Overall Depth is 7/16" Holes are 2 1/16" from center to center. Hole Center to back is 3/8"

Looking for something compatible for several broken locks and keepers. Have the discontinued Allen Stevens part number. The locks have a rabbit in base to match window sash frame. Attached picture has measurements. Any suggestions appreciated. Thank You