Viewing all customer Discussions for:

90-161 Window Lock & Keeper, 2-1/16"

Overall size is 3-1/2" Long by 1-1/4" Wide with Holes 7/16" off front of keeper. White Finish I checked Anderson site and they dont even show it. Oh boy!!

windows no longer latch. May be damaged lock and keeper. No brand on windows. Lock has 9203 R2 and LF5 9207 marked on it. Only a 4 on keeper. Keeper holes are 7/16" on center. Lock holes are 2 1/16" on center.

I need 4 of these locks. They are stamped with 680105. The Hole to hole measurement is 2 1/4" width and 3/8" from the front. I have already purchased and tried the 90-161 locks and the keepers are too tall and the throw is too deep. Thank you!

Hi, The lock on my window broke and I would like to replace it. Milgard is not being very helpful. I have attached two pictures. Let me know if you have the part. Thanks! Kris

I am looking for a replacement . The distance between the 2 holes is either 2 inches or 2 1/16 inches (kind of hard to tell precisely since the top of latch curve). Thank you

Need window latch design below

Hi, need a replacement for a window lock but can't find right parts. Current window lock is a True CAV3 PN41131 (pics of it on a different window are attached). I tried to replace with part nom. 90-161 - Window Lock & Keeper, 2-1/16". Holes fit perfectly for both lock and keeper, but the lock ca ... (cont.)

I am looking for new latches that look exactly like item # 90-180 except with slightly different measurements. My latches have ,as seen in enclosed pics....2 1/16 × 7/16. Thank you.

2 1/16 wide holes 9/16 from window edge. Beige 2016 Duraseal L5 windows model 033016 04:16 made in USA. I need to replace two of the right side latches due to plastic part cracking.

Hello I need a set of window locks like this or a similar set that will work, My locks are frozen because the window is in the shower.

The lock says CertainTeed with a c or g after the name. Hard to read. The 2 top pieces are part of the locks as well. I only have one of the screws to put it back on and I need to replace 2. Help! Please

Screw holds 2 inch spread

This is the actual lock and keeper I need to replace 25 like kind and color. I don't need alignment pins/notch. Prefer as indicated (left) as pictured with Philips screws. Please provide catalog number and availability. Number 2 is on the lock 40715 is on the keeper 1. Thanks!

I am in need of this replacement. The lock part # is 9402, the keep is 9414.Thank you,Dave

Hello, I am looking for replacement parts for some windows. I believe they are Anderson windows. The lock says 411099

I need double hung window lock replacements for the following windows- sticker on top sash says AMSI Series 8500 MST 3850 ANSI /AAMACan you help?

Hello, Looking to replace beige window locks with white locks.

I believe this is a Truth Hardware brand sash lock, 2 1/16" between screen hole centers, 3/8" screw hole center to locking edge, 1/4" height from mounting surface to top of screw hole deck. 1 1/2" keeper. Bronze color. Only sash lock (not keeper) is broken. Home is 35yrs old, but idk if these are or ... (cont.)

Let me know if you have this window latch and the cost. Thank you.

I'm seeking for a window lock as seen in the attached images.