Viewing all customer Discussions for:

90-161 Window Lock & Keeper, 2-1/16"

I am looing for this lock to match what I have, I saw one item # 90-277C might be it but there is no writing on it. The bolt center is 2-1/16" and 7/17 in same as mine and I need the complete lock. Is this the correct one just a replacement. My windows are 30 years old but in good shape. If you can ... (cont.)

Hi my name is Tom and I'm locking to repair my United Windows 4100 series White.I'm locking for some vent lath and locks, annex is some pictures.Also I have a casement window who need a hardware to close that windows, annex is some picture.let me know if you have and the price.Thanks ... (cont.)

Do you have replacements for the attached photos? I tried looking though the website, but did not see an exact match. If these are unavailable or discontinued, do you have an alternate type that would work? I need 10 sets.

I'm looking for a replacement for this window lock. I would like to get a close match.

Window lock measures 2 3/4"×1"the other piece is 2 3/4×1/4"Hole to hole is 2 1/2I haven't been able to find this size to replace several broken window latchesThank you

we recently had our interior house painted and the painters lost 4 of these... can you find a replacement?

Several of our window locks have broken since their installation in 2013. Retailer said the GA windows are discontinued and suggested we check with Swisco about finding a replacement. Any recommendations?? "Lock" is printed on the top. "W1" and "45505" are printed on the bottom. The metal piece ... (cont.)

2 1/8" center to center Hope you've heard of this manufacturer

I'm looking for new hardware in white for the attached latches; left/right swing window side latches, (1) top latch. The side latch shows the # .092. That is the only marking I see. I don't see any markings on the top latch.

Viwintech widow need number for lock and the catch in the drawing

I need 6 tan window latches for my Champion 8200 double hung windows.Can you help?

I am at your website and noticed Certainteed sash pivot bar part number 26?353. This looks like the one identical to my picture? Do you have the Certainteed window lock assembly like the one shown in the picture looks like part of the lock fits in that groove in the sash. Do you have the Certainte ... (cont.)

Please see attached pictures I need a replacement partI found this below link which recommends S795-36 and 15-194 https://www.swisco.com/discussions/Replacing-Window-Channel-Balance-77-100663Added more pictures

I am experiencing trouble trying to find a replacement for the attached "latch & catch" Any help would be apprecaited. Thanks, Jon

I am looking for a replacement cam lock, see photo please. It is 2" from screw to screw, and 2 1/2" wide side-to-side. Do you have these available and if so, at what price? The lock clearly says PRISM on the top surface. I await your response, thanks in advance.Regards,Dennis

Hi! I need to replace both the tilt latches and the sweep lock. Any suggestions on what may be a good fit? Thanks!

the latch and striker have a male female positioner

Window lock, inner piece, older window, 2 9/16"The narrow section of the lock has broken on a few locks.Would like to purchase replacements.Thank youDoug

Don't have any Identifying marks. Haven't been able to take them off to inspect. Latch must work at 90 degrees. (Right angle). I've seen many of these on Mirage screen doors, but Mirage says they don't have them.

Hi Require Qty 4 of each Thanks