Viewing all customer Discussions for:

90-169 Face Mount Keeper, 7/8"

Lock / Latch for Jen Weld window part number 2600-402.

I am looking for these sash locks. Hole spacing on the keeper is 7/8"Hole spacing on the operating part of the lock is 2 1/16"

The lock's lever is broken.It's 2.75 inches long by 1 inch wide.The space between the screw holes is about 2.25 inches.White.Numbers on the backside: 30701 on the white part and 41291 on the metal circular lock part.

MI windows suggested that I reach out to y'all. For mi windows because these parts are no longer manufactured by MI Windows and doors. GA5500 is the window series that is installed in this house. I have one window with missing keeper or receiver. I have sent pics .Thank youEdward ... (cont.)

I believe the link below is the latch piece I need. I attached two photo's from two windows, one is broken and one is fine. https://www.swisco.com/Keeper-Face-Mount/pd/Hung_Sliding-Replacement-Sweep-Locks_Keepers/90-263 Another question - if the windows won't hold open all the way (some slide down ... (cont.)

Hello, I am looking to replace broken lock, but cannot find the right one. The window is vertical slide Sash about12 years old.

Customer does not have window manufacturer info and needs new locking mechanisms for 6 windows

Looking for two strikers for Showcase brand vinyl windows windows. It is the part the latch curls into when you lock the window shut.

i need help finding tilt locks and window locks also took a piture of the gold tag that is on the window its selfStephenie

Replace broken window say lock

Hi ! I am currently looking to see if someone could help me find this item. I believe it's called a front face window sash. I have no clue what brand it is but I've attached some pictures. 2 x 1 1/8th and holes are 1/4 between them

Hi - Looking for these sash keepers, face mounted, flush, white metal for windows that are about 15 years old. We cannot find any manufacturer markings on them. The size of the keeper plates are 2" by 1.25" Looking for about 24 pieces. The actual lock/lever piece is fine and does not need to be ... (cont.)

Viwintech widow need number for lock and the catch in the drawing

Hello I am looking for this keeper and wasn't able to find it anywhere. The sash is a 8100 series. Please help

window pivot block ,triple coil balance (3.5 33") lock keeper screws 7/8" apart

looking for this window parts. please can you help me? don't know if you carry this parts. sorry don't have part number. like to hear from you. mario. ps. have and account with swisco.

Update we took it apart for better identification we have tilt windows and need replacement parts

We have tilt windows and I need to identify the part on our windows to purchase a replacement

I have attached the label to the windows that I have. I would like to know if you offer replacement latches. I have a few that a broke and need fixed. If you have them how much are they and how much is shipping?

We need 2 sets of 27 3/4" balancers 4 sets of 33 3/4" balancers 6 bottom pins 1 window latch Please see attached photos