Viewing all customer Discussions for:

95-002 Capitol Window Panel Corner, 3/16" x 3/16"

I am looking for these Internal window corners. They are c=from an aluminum window screen, in a vinyl window. I am guessing from the 80's. The screen is 5/16" thick, the corners are 3/16" . one side is split so it will fit in the top and bottom rail.I will be getting 50 corners if we can get ones t ... (cont.)

Hello. I need to order 8 replacement keys for my window screens as I lost the clips. Unknown manufacturer and model. Can you please help me identify what part to order? Thank you.

I would like to purchase if you have them the top and bottom corner keys for an older Larson storm door top sliding window frame. They are very similar to the 95-140 and the 95-002

one of these corners is 1-1/2 inches north to south and 1 5/8 inches east to west. With a width of 1/4 inch. The other corner is 1-3/8 by 1-3/8 inch With a width of 3/16 inch. A Swisco rep suggested that I purchase 95?016 for replacements However they are too thin and don't catch inside the slides. ... (cont.)

Storm door window corners. #210 stampable corners we don't use screws. We are a storm door manufacturer in Independence Mo. having a hard time finding a distributor of this part for our doors.

Dear Swisco, I need some parts to repair old storm windows. Image 8726 shows a right and left slide bolt to be replaced. If you have them I would like three right and three left. Measurements are: total length= 3 5/8 in; Body Height=3/4 in, Body depth thickness = 7/32, Nose length= 1 in, Nose Height ... (cont.)

Corner pieces have the number 270 on them. We would need left hand and right hand storm window slide latches as well as the corner L shaped pieces. Thank you for your help.

Swisco I need at least 4 to 6 Galvanized Aluminum Corner for galvanized window frame. I cannot tell from the pictures on you website which are the best ones. My corners are 1 1/4 in long and 3/16 by 3/16 inch square. Which of your offering match this? Pictures below

Hi Looking for replacement parts for American Craftsman 8500 series. Pictures and tag are attached. Thank you

My Storm corners are broken and I would like to find which part is best to fix them, please see attached picture of one side of corner that I could extract that was screwed in, the other leg looks like it is punched in the metal.

I am looking for this type of corner and latch. Do you have these items?

Looking for a screen frame corner like the picture attached. Its a two prong piece which has broken off. It inserts into a 1/4in by 1/4in square hole.

Please see my picture and advise.

I don't know the brand of the door or parts, but I need 2 ( left & right)of the L shaped corner brackets & 1 of the latch ( right side) left is shown as an example. Thanks, Jim

For screens that are broke! I need the corners. I ordered the wron size I need 3/16x3/16x1 inch.

Window frame is 5/16" thick with no reveal of corners. See pix for measurements of corner key... Thank you, Nelson B

Looking for 9 of these

Storm Door is A.J. Manufacturing sold by Menards, probally 20ish years old. Need both left and right latch plus corners, will be ording 2 sets of latches plus 8 corners.

Looking to identify this window screen corner or a differen one to repair my screens

looking for American Craftsman window screen frame replacement corner brackets None at the hardware stores will match or fit. Picture is a good one, several have broken in screen removal. Other pics show frame corner. Looked all over windows and find no labels to locate PN. Thanks, Jeff ... (cont.)