Viewing all customer Discussions for:

95-016 Stamped Storm Window Corner

hello, I'm seeking your help to identify the parts to reassember my storm windwo. the pictures of "thicker" and "thinner" are the corner key, which are borken. I noticed the "thinner" one is 1/8 thinner than the "thicker" one. Additionally, for the "top 2", I am not sure if it is rasied or straighte ... (cont.)

Corner connector for glass panel of storm window. Have numbers 4024 and 4025 on the piece. They are about1 inch long and 1/8 inch wide and not completely flat.

My glass storm windows (Benada) are screwed together at corners. Top tilt is nylon/plastic and has hole for screw that fixes it in place. It is 3/16 x 3/16 x 1 1/2 (including 1/4 tilt insert)I have located other parts on your site (91-090, 95-016, 95-00995-008) that seem to fit Although my screen ti ... (cont.)

The attached photo shows a corner key that I drilled out of one of our storm windows. I procured some replacements from a local business, but the dimples are located in different positions, so it requires dimpling the frame in different positions to install the new keys, so it doesn't look great. Th ... (cont.)

I do not see any in parts search. I have a bunch of screens to repair, please help! Thanks Peter

The tilt keys are marked 1350. The lower keys (no tilt pin) are marked 1349 I have found several keys that are 5/32 thick but none with a 5/32 thick leg and a 3/32 leg. Do I need to get some 5/32 keys and mill one leg down to 3/32? Other suggestions? Thank you!

I am looking for parts and saw your items # 95-073, 95-190; 95-191 for the top tilt keys and the bottom latch keys (left and right) items # 99-033p. The latch is 3 5/16 long. I removed existing parts from the screen window and measure them out for youCan you confirm what items would work for me. ... (cont.)

Hello, I'm hoping you might be able to help me identify which parts I need to order for this type of storm windows. I need to purchase a few bottom corner keys. A left and right side bottom key. I also need to know which springs to purchase, the ones that attach to the latch. Thanks! ... (cont.)

I have an older Storm window with 1/8 Thick Glass. The two corner keys have broken off the bottom rail. I have identified them as 151 and 152 Left and Right off set corner Keys respectively. The bottom Leg appears to be 1/4 x 1/4 at the thickest point and the vertical Leg appears to be 1/4 x 5/32 at ... (cont.)

Hello, I have a cape built in 1950, fitted with these storm windows (half screen on a double-hung window). I am missing two wndow screen frames possibly added at the time the house was resided, date unknown. (?) I see no markings from the manufacturer on these storm windows/screens. Perhaps you can ... (cont.)

Hi. I found the tilt corner I need it is item number 95-015 but could not find the regular corner with the same dimensions. I would appreciate any guidance. Thank you.

I was trying to disassemble my window frame and broke the corner key (by the latch). Several years ago I ordered tilt corner keys which were 3/16 by 5/32 (which I assume were the correct size), but I do not see any regular corner keys of that size. Also I do not know how to remove the broken part ... (cont.)

Old storm door. Looks like lead corner. 1.5" x 1.5". I would guess one of the larson kit sets. Can i buy this as a set and not the other type?

What do you recommend?

I am looking for 2 of these the number say 4007 I can not find it any where are you able to let me know if you have 2 or more of these? Thank you.

Latch and corner key to be one assembly. In picture, there is a number 3 and a shield with UHH (?) inside it. Hope you can decode and replace. Thanks, --kevin

I need replacement latches and corners for a storm door window. Need all four corners two with a small pin at the top of the corner and one sliding latch. See photo that says seal.

The bottom horizontal rail of the window/screen has a larger channel for the corner key than the vertical side rail. I tried part 95.016 which is 3/16" on both legs. It went easily into the bottom rail, but I could not get it into the vertical side rail. The vertical side rail opening looks to me ... (cont.)

I have several aluminum framed screen and storm windows that have broken tilt keys. I attached photos of a storm that has a plastic key, but most have metal. I have no idea how to take them apart to show the key outside the frame. Can you identify a replacement based on the photos? Wished you ... (cont.)

Thank you for your time and help! I've seen some similar latches on your site, but just not sure which ones to order. I'll need Lefts and Rights. Thank you! I don't care if plastic or metal.