Viewing all customer Discussions for:

18-125 5/8" Top Sash Guide, Rollyson

What kind is most similar to the pictures attached?

There are two plastic inserts in my single hung window where one insert is broken I need to replace. One picture show the clip in place in the sash. Another picture show the clip missing. And a third picture is of the insert I need.

I have 6 failed parts for these windows. I would to repair them hopefully these photos will do the job?

Metal 29" long 5/8" wide 27 4 GK CALDWELL channel balance

Good morning,I recently purchased a handful of channel balances and on one of the windows I also noticed that the plastic hook that is screwed into the window to grab the channel balance is also broken. Can you help me identify this piece and do you sell it? I have attached a picture. It is a little ... (cont.)

I have rollyson top window sash guide 60-675BL. I understand the Black is no longer available and only the 60-675 in white is available. I wondered if it's possible to tell what window model I have as well as the balance model based on the sash guide number.

Don't see a 5/8 sash top that locks the balance to the window like this one. The Chanel balance top sticks out above the sash top on the Chanel side. Can you please help.

Gentlemen: I hope you will be able to help me find the top sash that I need for my windows. I have attached three photos of the one that I need. Please contact me as soon as possible. Thank you

Rollyson 18-794 ?

The closest match I found is the 18-044. The screw is offset to the inside so I will have to enlarge the hole. Do you have a better match? I've already replaced a lot of 380 channel balances with the 19-005 tops and they work fine.

There are no visible names, numbers, or markings. Dimensions: Total height: 1 5/8" Dimensions of top: 15/16" x 1" Top to center of screw hole: 7/8" As you can see, it broke in half where the screw attaches it to the window frame. Thanks, Bill

This part has no numbers or markings. It's the clip that goes in to keep the balance from coming out. It goes at the top edge of both sides of the window. It's 15/16" wide and 1 1/2" long. Thanks for any help.

The distance between the center of the mounting hole and the bottom of the top plate is 3/4". Please see the picture below: