Viewing all customer Discussions for:

21-071 Bifold Door Top Pivot and Guide Pin, Peachtree

Trying to find the correct part for the non hinge side that runs in the track. This is a picture of what I need from another door in the house. The whole mechanism is missing from the door in question. Thanks for your help

I am trying to identify and replace parts for this make of metal bifold closet doors probably made in late 60s or earlier 70s . I have 3 closets and doors are in good shape . I would appreciate any information concerning these doors . Thank You

Hi. I need replacements for 2 of the spring-bearing guides. My pivot ones are ok. I just do not know which ones to order.

We have 5 metal bifold doors that are 98" tall ,our house was built in 1977 do you have replace ment pins and caps . The pins Top are 1/4" x4 and 3/4 long and bottom pins are 1/4" x 5" long. Also do you have a distributor in Canada? Thanks for you help John

I need, I believe barrel Springs, plastic clips, I need plasticcaps I'm missing the rod, plastic holding clips, I definitely need help with this project.

I'm looking for replacement hardware for 93" louver closet doors I have tracks in the top and bottom of the closet I can't seem to find them anywhere.

Hello. I need replacements for the item shown the photo. I've viewed the products available on your website but am unsure as to which would fit the doors. Your assistance is appreciated. Thank you Maria Nunes

Help! I love my steel doors but various parts, like the bottom pivot bracket, are breaking or missing. I need help finding ALL parts for these doors as a lot of parts are missing for them to be operational. I have included pictures of the parts that I have. I don't need the track or hinges. Hopefull ... (cont.)

Only one bifold in my house from 1975 has the hardware still intact. The rest are pissing guides and pieces/springs worn out and don't slide open or shut. Having trouble finding parts locally

I ordered 21-071 and it works well. I need the fixed pin as well. What part code is that? Also I need the bottom track insert. Reminder to myself I need 21-149. Thank you in advance.

This is an old bifold door that is floor to ceiling. The hardware is longer than what I can find anywhere else.

Doors are 49 years old and the pin pictured is for the bottom front (the part of the door that moves. It is held in place by a screw. I believe the problem is the broken plastic piece on the bottom.

Looking for this pivot pin assembly.

I need replacement bifold door pin caps, and the post is .3 or 3/10 of an inch. These have just worn out or fallen off over time. Can you help?

Hi...please please tell me that I can order the pivot pin or whatever it's called in the pictures. The closet is probably from 1974 and one door is missing the pin I attached in the pictures. Please help! Thanks.

I am renovating my place and decided to spray paint my old closet doors, unfortunately once I removed the doors the top pivots came off and the little plastic plugs are no longer keep them from springing out. I will need to order new top pivots and bottom pivots along with additional stationary pivo ... (cont.)

bifold door bottom pivot assembly including the two almost square plastic pieces to hold the rod and spring with the lock and top plastic head. have added the photo of the other one thats working. need the same set. appreciate your help !!!thanks

I need about 6 of these guide pins so I want to make sure I get it right. Can you help identify the correct pin? As you can see from one of the photos, the current pins (or the broken pins) were 4 1/2 inches long. These are metal doors, fairly old in my estimation. I'm sorry that some of the photos ... (cont.)

I need 2 Bottom Rollers, 1 Bottom Pivot, and 1 Top Roller. I can't find any markings on either the parts or the door. Each is about 4 inches long. Any help you could provide would be greatly appreciated! -Don M

pin is steel i/4" diameter, 4 1/2" long including nylon slider cap. Pin has two grooves 1/2" apart around the middle encircling pin is a spring 1 3/4" long, 5/8" in diameter for 1" narrowing to 3/8" at the othe end the spring floats free on the pin in the door channel through which the pi ... (cont.)