Viewing all customer Discussions for:

21-154 Pivot Rod Clamp

Please send me info on this, it attaches to a guide rod for a metal "B" door. Thank you.

Dear Sir or Madam,I am trying to identify and purchase parts in order to get metal bifold closet doors operating correctly in a homre that was built in 1970. I found an address to order parts from but I doubt if this is still valid. The address isPO Box 666Roseville, Michigan The tag states to refe ... (cont.)

Hi Frank. I recognize these parts from old Slimfold bi-fold doors. For a bottom threaded pivot pin, see the 21-001. For the guide pin, see our 21-007. The clamp can be replaced with our 21-154. If you need bumpers, see our 21-277. Look over all parts to confirm that they match your old components. W ... (cont.)

Is this part available? The part is off of a metal bifold door. It is designed to fit into a 1/2 inch square hole and accomodate a 1/4 inch pin. The screw is used to secure the pin at the proper height.

Hello, I am looking for this piece for 1993 bi-doors. Can anyone help me? Thank you.

The product number on the label on the doors is BJJDFG. Attached pictures of the guide pin and clamp. All clamps have cracks in the plastic but I am not missing any parts otherwise. I am also interested in replacement track bumpers. I have 11 doors that require new pin clamps on 6 closets. 5 have do ... (cont.)

How can I hang this type of door without putting a track on my vinyl floors? What is the part number for the Pin with the spring at the top of the door?

We have a mirrored slimfold model E door going into a small walk-in closet. The bottom inside pin constantly shifts in toward the closet edge, making it nearly impossible to get the door opened or closed. Not sure what parts we need. Am reasonably sure we need new bottom pivot pin and possibly ... (cont.)

Hi I have bi-fold metal doors, 3 feet (1 door), 5 feet (2 doors) and 30 inches (1 door). I am going to replace all the pins and tracks with your help (of-course). Can you tell me the parts needed. Thanks P.S. I researched on SWISCO.COM and I placed an order (1139482) based on what the parts for on ... (cont.)

older Slimfold door. Bottom pin is just a pin and there is a clamp piece to hold it in place. I have a number of pins, but none have the screw slots at the top, so I need to replace these. Could it be the 21-001 even though it seems to have more parts to it? Need top and bottom replacementsmaybe ... (cont.)

Hi, I need replacement pins for some old Slimfold Model E closet doors (see pictures). I think I'm supposed to have three retractable and one stationary, right? I sent pics of one of the two doors. What do you think? Thanks!

I would like your pointing me in the right direction for these parts, Anthony

Good day. Glad I found your site. I need to replace the 4 pins on each door because the old ones have worn out or broke. The plastic pin holders fall out or are broken. When I tried to reinstall with the old parts it was difficult to place properly. One of the top holders will only move a little way ... (cont.)

House was built 1990 thank you Stephen

I need to replace two metal bifold door pins that have gone missing since the property was built in 1962. This is a photo of one of the remaining pins. Please let me know if you have these parts, and their numbers in your inventory, if you have them. Thanks.

I need replacement parts for Slimfold BiFold Louvre doors. Please review the picture of the parts and advise regarding which replacement would best suit my needs. Many thanks. Regards, Louise

I have bifold doors that are badly in need of replacement parts. The doors do not stay on the track and are very difficult to open and close. I have attached pictures of the doors with the hardware exposed. These are model E doors.

It appears that your part numbers 21-001, 21-007, and 21-154 could replace the parts in the attached photographs. I assume the guide pins would also fit the upper and lower door tracks. Could you please confirm all of this before I order? Thank you

WOuld you be able to supply parts for these doors.

Hello, I have a slimfold bifold mirror door manufactured by Dunbarton. However they do not ship to my area (BC, Canada). I need the aluminum track and bottomless bracket hardware set. I put someone else's email address because it wouldn't accept mine