Viewing all customer Discussions for:

21-154 Pivot Rod Clamp

The pins and parts of the pin assembly are missing on some Weldwood bi-fold metal closet doors in a house we just bought. Can you tell by the photo what I would need? I need 10 of these if you have the correct part(s)? There are photos of the part both installed and removed attached. ... (cont.)

I am looking for replacement part for some Weldwood bifold doors (they are metal not wood doors) specifically the pins and any related hardware which holds them in place.

Attached is a photo of the lower part of one of my US Plywood Metal Bi-Fold doors (that are about 45 years old). The circled area shows the clamp which is tightened to the guide pin to keep that pin in place. I have lost that clamp and I have not been able to find a replacement for it. From ... (cont.)

The doors are fine I need all other operational parts to glide doors open and stay in the tracking top and bottom.Price and availability please. for Model number AAAJFG .Pins, springs, keepers,guides, bumpers etc.

Looking for replacement pins, hardware, and bushings for a model B bifold door.

I am looking for top and bottom pins for metal bifold doors. I hope the pictures I've attached will help. All the pins are 5-1/2" long. I also need 36" of track. Any help you can provide is greatly appreciated! Thank you.

missing or broken hardware from a set of louvered metal bifold doors

Need hardware for older weldwood metal doors made by us plywood see pics Thank you..

Hi I have a 3ft metal bifold door and would like to replace the top and bottom track and 4 pins. Based on the attache photos what would you recommend Thanks

Hello, Based on posting/pictures already on your site I have identified the bifold doors in my house as old style Slimfold. But I had some questions about the parts I need. Want to replace all the pins and brackets. Are the pins and brackets on the top same as bottom ? That is the pivot pins, guid ... (cont.)

I ordered 21-402 & 21-150 & 21-108 for a mirrored bifold closet doors. 21-108 does not fit in the track I ordered i talked to one of your reps and they said i need new pins and caps to fit the track she asked me to send pics of the old pins they. can you let me know what all i need to order to fit t ... (cont.)

Hello, I have one benchmark bifold steel door that I am missing all 4 pins for. I was able to identify what I need except for the bottom corner that stays stationary. I think I found the pin on your site but I seem to be having issues with the top plastic piece on that pin. Thanks, Jason ... (cont.)

I have two sets of US Plywood branded Metal Folding Doors. Both are obviously reasonably old. The metal and plastic fittings are worn or missing and I would like to buy 4 complete sets of parts, one for each corner, including the 4 moving metal sliders, which sit inside the channel rails, into which ... (cont.)

Need just the nylon cap. Couldn't find it in the accessories.

I ordered some bifold door parts to repair my closet but they do not fit. For 21-001 The bottom assembly. I believe I can take off the 3/8" cap and replace with a wider cap. Do they all fit universally with the pin or do I need to buy a whole new set and return the 21-001? The 21-154 does not ... (cont.)

Attached are photos of the top of the metal bi-fold pivot. I also needs some of the threaded parts for the bottom pivot. At minimum, I need (4) springs, caps, and the best device to hold in the pin. The pin is 5/16 (.310) x 5 1/4" long. I was looking at parts 21-065, 21-001, 21-007, and 21-154? ... (cont.)

For our metal folding doors, R 60-2028/2130 The spring that that holds the thin metal tube broke as well as the screw cap part cracked as well.

We purchased our home in 1972. Three of the four bedrooms still have the slides for the doors which were taken down when the various parts failed over the years. The doors are still in good condition, but most of the various parts need replacement. And, I can find no instruction sheet ... (cont.)

Will the 21-154 clamp work with the existing rod?? The old style clamp has a metal bracket and I was concerned that the all plastic clamp might break too easily.

I need lower guide pin parts that is shown in the attached photos. The label on the door says it is model "D" door with date of year 1973. The door is a metal bifold 7.5 feet high.