Viewing all customer Discussions for:

21-404 Bifold Track, 4' Opening

I need those pins and brackets for metal bi-gold door

I would like to replace both tracks on this 48" steel bifold door as well as all necessary hardware.

Have a lot of pins and grommets needed to fix 10 closet doors

The doors are marked "Benchmark Bi-Fold Steel doors" and each set of doors is approximately 48" wide. I would need the top track and bottom pivot/track- the only thing I have is the doors.

I am looking to replace all the mounting hardware for my 96-inch bifold doors 1975ish (full-vu. Model 8433 Serial 861097 I just want to make sure I get all the correct parts or any missing parts. If any kits work, I have no problem replacing the tracks. Thank you Paul

Hi I need to replace hardware in all 6 doors. Please help to identify what i need Thank you so much

I am needing hardware for a project that we are working on. They are metal louvered bifold doors. Needtop and bottom hardware for 1 set. I have attached pictures of each. I estimate the home to be built in the 1920's but not sure when the doors were added, possibly original. Any and all help would b ... (cont.)

I need to get the correct bottom track. I was looking at your low profile track to place directly on new tile that we installed and want to find the correct one to work with these doors. I also might need to hardware for the doors themselves. I am attaching photos of the doors, the current track ... (cont.)

Hi, the assembly part of my bifold glass doors broke I want to replace all the hardware What pieces should I get? The track is quite small, opening of 1/2 an inches And the bottom assembly is broken on one but I'd like to replace them all I live in Canada if you can ship here, thank you ... (cont.)

Hi Ron looking to rebuild how thanks.

Hello, Would you be able to assist me with locating and ordering parts for the referenced doors? I'm looking for the following components to install the Benchmark Steel Bifold Doors. Tracks- (1) 24" & (1) 36" Hardware- all components needed for the doors to swing. Please note, I've added photos o ... (cont.)

Looking for replacement part for lower pin on older metal Slimfold mirrored bifold door. I think the door model number is 25273062 (picture is attached) The existing pin that is bent is 6 1/2" long as show in the attached picture(pictured next to tape measure). I tried getting the one in the box tha ... (cont.)

Hi, Do you have any suggestions for a new track & pin system to work with existing Leigh bifold doors? My neighbors keep getting rid of their doors and not putting out the tracks with them! I painted one set and had something that kinda worked, but with limited bottom supports and the disk tops a ... (cont.)

I have Benchmark metal bifold closet doors. I need the Primeline part from Lowes that's part number 795884. A Swisco person said I should start with the 21-044 and I think that's a good match. But he would not give me all of the parts I need. I need all of the parts I need to install my door. ... (cont.)

i have a pair of 24" metal bi fold doors and based on the pics i need the following parts so i know what to order: -top pivot pin -top rolling pin -bottom pivot pin -bottom rolling pin -48" top track -48" bottom track

Hello, I am looking to replace the tracks (currently they are the same profile top and bottom) with a new low profile top track and floor pivot without the track. I am looking for the top track to be a silver or white finish. Do you have a kit or list of parts that would appear to work? The opening ... (cont.)

I am replacing the bifold door track on a customers 8 foot opening that had two four foot tracks mounted overhead. The existing track is pretty bent up so I want to replace it with new. The 24 inch bifold doors are fairly heavy and I want to make sure the track I install is strong enough to hold up. ... (cont.)

hi there, i have two different types of floor to ceiling old metal closet doors. i need to install them but i'm unsure which pieces they both need. i redid the floors so i'd love to have them only need a track on the top if possible. the height is about 94" tall and the width of each closet is aroun ... (cont.)

Hello Swissco. Need floor track,looks like a two-piece system. The pictures attached may need a different angle to view properly. Thank you for any advice on this issue.

I Need another metal post and the plactic tips. I just do not know what size will replace it. I also need 2 new spring post to click them into the top. This is for an 66 years old garage furnace closet. The doors are nolonger bifold, they where fused together so they only swing out pivot like a ... (cont.)