Viewing all customer Discussions for:

21-404 Bifold Track, 4' Opening

I would like to buy 2 tracks for my Benchmark Steel bifold door. also I need to confirm that I need the following one of 21-0002 pivot pin 3 of 21-004 guide pins thanks huda

Picked up eight (four 14 3/4, four 11 3/4) Benchmark bi-fold doors at a salvage yard.They seem to be in excellent condition, aside from one missing spring, I think all the door specific hardware is intact. I need everything else to install the doors in a pair of 108 inch openings. Not sure if this ... (cont.)

We are looking for 4 foot and 96inch bottom tracks for bifold closet doors. Hope you can help.

Please let me know which patr number is match to in my picture 1 part i found in your part picture your part number is 21-007 match with my part onather 2 part please let me know your part number This is three pieces 1. Top 2. botam. & in middle part is base sockets.

I need replacement pins, which part would I need? The pins it has now are 5 1/4 in long and 5/16 in diameter. Also if I decided I wanted to replace the tracks which type would I need for the top and bottom?

Hi am having trouble finding the hardware and track for my old metal bi fold doors. Do you have hardware kits available? I still have to top track but I'm missing the lower.

Good morning, Looking to replace the top and bottom tracks (48 inches) for a closet with metal bifold doors. The house was built in the 70s. Please see attached pic of one of the closet doors and please confirm if product # 21-404 will work. Thank you. Jared

Both bi-fold doors in the picture get stuck due to a worn and dented track. I'd like to replace the top and bottom tracks. It's 48" wide. I'm just wondering if the tracks you sell are compatible with these doors. Also, the doors don't close flat because the 3 existing hinges are rusty and have ... (cont.)

I have no experience with this kind of door but I am handy and have been doing some research. I'm pretty sure I can figure it out with the correct parts. I have many more pictures if you need clarity , including pictures of a working door with parts intact. These doors have been a nightmare but my ... (cont.)

Plastic sliders compromised, do not hold on to Inside pins where the two doors close.

I'm looking for a bottom track for a bifold metal mirrored closet door. I recently got the guide pin 21-007. This is the track that goes into. The pin fits the door perfect but it rubs on the sides of track. Thank you.

My name is Roy, I have 12 old metal bifold doors that needs new guide pins, springs on the top and bottom. Here is the door that I need part for please lmk thank you These doors are about 50 years old and all needing replacement. Thank You Roy

Looking for replacement hardware and diagrams for 1960s steel bifold closet doors

Please contact me regarding replacement parts

Can you sell me this pin?

I think I've identified the parts I need. They are: 1. the stopper with the screw that prevents the top axis pin from sliding. 2. The two plastic rollers that go on the top sliding pin. The width of the track sliding slot is 04" or 10.3 mm The diameter of the top sliding pin is 0.18" or 4.6mm My on ... (cont.)

Hello, I have some old metal bifold doors. I'm looking for everything in the picture and the doors look pretty much like this. But I mostly need the stuff for the top. Everything basically including the plastic piece that goes into the track that sits on the pin.

Hi, I have seven metal, louvered bifold doors (circa 1970). I'm having doors powder-coated, and I would like to order new caps for (I'm unsure of proper nomenclature so I'm calling them) pivot-pins and slide-pins. I hope that you may provide assistance in identifying the correct replacement parts ... (cont.)

Here are some pictures of my older bifold doors, if you can identify them, I need a list of the two top and two bottom pins I guess? Anyway, feel free to reach out thank you guys.

I need help finding a 60-in and a 48-in track that would work for these doors. I have. The current tracks look like the photos I submitted. Thanks Patrick