Viewing all customer Discussions for:

26-336 Pivot Bar, Simonton

It is a metal part that goes on the left and right side of the window and allows the window to rotate in to wash them

I need a balancer assembly and a pivot bar for a Simonton double-hung sash. The balancer goes on the right side of the window facing it from inside the house, and the pivot bar goes on the left. the photos of the installed balancer are of the left one, as I had already removed the broken right side ... (cont.)

1 part needed

Has anyone gotten this to work? I bought a few of these but they do not fit as the latch/wings on the original is at the tip, and this one is further down. If I were to grind off the excess, then the large oval part would be too close to the shoe. I am gonna try the pivot bar 26-403 next. Would ... (cont.)

Hi! I need to replace the coil balance springs on 3 2005 installed Champion windows. I'm really only not sure about the upper spring supports. They have A-F vertically next to 6 dimples. One has a 3 to the left of the A-F and one a 2 to the left of the A-F. I'm thinking a 15-150 1/2" standard supp ... (cont.)

A pivot is broken and I have ordered two different pivots thinking they were correct, but do not have the same profile. Do you have the pivot pictured? Thanks, Wil

The pivot bars in our pivot window are broken. The only thing I can read on the bar is "china". I haven't seen anything on the website that matches exactly. Do you have a recommendation? Should both the shoe and bar be replaced?

I need a few of these as well. Can you identify this part?

Please identify so we can order.

I need to replace the broken pivot bars in the Simonton Windows in my garage. I do not see an exact match on your website, can you recommend one that will work. The bar is 2 1/2" long, 5/16" wide, 3/16" tall, the length of the T-bar at the end is 7/16". I have attached a picture of the pivot bar ... (cont.)

Looking for the metal piece and the plastic piece holding it. Need 2

3 1/4" long 5/16" wide

Hi, could you help me with replacement parts for this window? I'm pretty sure the balance shoe is 15-177, but no idea about the correct pivot bars to use. Thanks for your help!

According to the sticker, these are Simonton H-R 35 44x60 double hung windows. I need a few (4) of these pins plus four of the safety switches also pictured.

I ordered the 15-192 on orders 2272882 and 2283840. Not only does the stone on the window not fit into the channel the metal between the two are different colors. I've ordered 3 and altered 2 but the channel is too narrow. I have shaved the guides off both sides of the shoe which helps the shoe f ... (cont.)

The metal piece that slides into the balance is broken.

Has an "A" stamped on one side. I'm not sure if the twist in the end is by design or if it twisted while someone tried to force the window open to take it out. If it is by design, then the left and the right pivot bars would be twisted in opposite directions so when inserted the window rotates out o ... (cont.)

The width is 1 1/2.

Hello Ive got a customer that had windows replaced and has a couple pivot bars broken . I have been trying to find part number but no luck

I have tilt in windows, and a pivot bar? broke and I need a replacement part. However I don't know the manufacturer of the window, so it is hard to identify the part. Also need instruction on how to dismantle, install and reassemble the part. Thanks