Viewing all customer Discussions for:

15-086 Tandem Coil Housing

seeking the part number for double hung tilt-in sash both upper and lower. Thanks.

One of the balances is damage

I would like to replace the balances on both sides of this window with new parts, but I want to make sure I have everything I need and the correct parts.

Hello, I am in need ofthe following Atrium Coil Springs (4 Ea ) of the bottom coil springs #4 (4 Ea ) of the Tandem ( top ) coil Spring #3

Hello! I have a 2 coil balance shoe used in a vinyl tilt window by Viking. Pat 5,363,548. Curious what replacement part I should be purchasing. Thank you!

I have two windows with 22" bottom sashes where the mechanism in these pictures have broken. I took pictures of a third window that still operates correctly. These are vinyl windows, apparently Reynolds brand (?), that were installed back in 1998. After doing my research I think you have parts that ... (cont.)

Please ID this part. these windows are vinyl double hung. Climate guard brand. The on the other side (no photo'd) is broken.

I have several silver line double hung windows that need these coil balancers replaced. There is a number 8 stamped on the bottom part and a number 7 stamped on the top of the part. Is this a part that you could identify and replace?

6 39W

Double coil balance Latches

Do you have replacements for these?

One of my window sashes doesn't stay in place and keeps sliding down. These windows were replaced before I got the place and have no markings for the manufacturer or the coil mechanism. Attached are pictures from the broken coil spring (both sides are broken and the coil is out). I've attached a pic ... (cont.)

Hello, Can you please help me identify the correct replacement for what looks like a tanden balance (shown in photo). The broken coils are marked "4FC" and "5FC" (shown in photo). The coils are 15/32" wide. Can I replace this with one Series 161 9 lb single spring on each side, or do I need to re ... (cont.)

We are looking for the right double roller-tilt balance for a customer. The top metal band has a large "4" and then "31T" imprinted on the top coil. The bottom coil seems to have a big "5" and then "26T" printed on it.

The shoe measures 3 3/4" long when together 1 1/2 inch width Depth 1/2 inch I need both pieces and the bracket they it attaches to. 2 1/4 lower 1 1/2 upper

Hi, not sure which parts these are or how to replace. Can you help me identify full replacement parts? Thank you!

All I see is a #4 on these plastic pcs.

Need part id for this. Has pat# 5.353.548. Approx 4" tall 1" wide. Tension seems to work ok, but upper housing broken. Also I don't see cut out to remove. Is housing simple to replace with that coil spring tension. A video reference would be appreciated. This window is traco series tr4200 dh ... (cont.)

Good Afternoon, I ordered 15-087, 15-086, 16-024, 26-089, and S180 Coils with 33-072 Screw. Are there full installation instructions on how to get both Coils and parts in the jamb? Is ther a trick to getting both Coils on the Bracket? Thank you very much!

Hi there, this window became very difficult to open. I believe the coil balance busted on both sides? I've included label pics and I saw a 6lb mark on the shoe thing. Can you tell exactly what parts I need? Thanks!