Viewing all customer Discussions for:

58-162 Storm Door Replacement Bottom Sweep

Hi, looking for part to replace bottom of door were the door sweep is. Looks like it is unit and not just the rubber. Markings on are: PPC Herculite Trempe Tempered. CAN/CGSB 12.1 m. BS 6206-198IV. 16CFR 1201. ANSI 2-97.1 1984 SGCC 1065. If measured correctly dimensions are. 1 1/2 x 35. 2'11 ... (cont.)

I am trying to locate replacement rubber seals for the bottom of an EFCO door. It appears to be similar to a windshield wiper and slides in from the end (see photo). Thank you, Matt

This is from the back of the top rail of the bottom sash from storm windows, and it seals between the two sashes when they're both closed. It measures just under 1/8" on the short side, which inserts into the slot on the frame, and it's 3/8" in the long dimension. The latches on the sashes are mar ... (cont.)

Need Sandstone color retainer strips and Replacement Emtek 322 handle for what I think may be a Chambers brand door. Was installed around 1993, not certain. What color would the handles be available in? retainer strips as follows. 2 at 32" and 2 at 74"also need two rubber sweeps. They have a narro ... (cont.)

Please help to locate, Replacement sweep or extender one or both

Hello, need to order storm door sweep for a Pela store door along with the pile weather stripping.I believe the sweep is 3/8.

I am looking for the same as 58-162, except I need 11/16" not 7/16". I need two lengths 36"

I need new rubber sweeps for my door. They look like your 58-162 but they are black.

Hi - the rubber sweeps in the bottom on my storm door were torn and worn and now have fallen out. Please suggest a replacement product. The door sweep is almost 32" long and needs two sweeps. Thanks.

Hello, I have a double set of screen doors where the one side is regularly used and the other side is able to be opened, but has a built-in latch at the bottom and one at the top where they engage in the threshold. The doors are in great shape but I need to replace these two latches. Ive looked a ... (cont.)

Hi, I need to find a replacement for the following worn seal. It's 35 inches long, 1/2 inch height, and about 1/8 inch width at the top of "V" part of the seal. Please see photos of the seal and where the seal slots into the shower door frame. Thanks!

Manufacturer unknown. Only markings on door edges were hand written numbers 11 (underlined) then 276. Sweep top is dome shaped 3/16" wide and 3/8" high from top of dome to bottom. I measured the channel which is the same 3/16" wide or maybe 7/32" max.

Looking to order replacement part /assembly for rubber gasket strip that attaches to the bottom of the door to seal off drafts and moisture

35004032

I have a Pella full view storm door which requires two 58-162 bottom sweeps. The two tracks each have a rounded punched out bump created in the stainless track. I believe they are there to help stop the sweep from sliding out. These stops are preventing the sweep from passing through the track. Does ... (cont.)

Need replacement door sweep for Larson Manufactoring Company Storm door model # 14604031

I have Swissco doors And want to order replacement spline and a handle assembly. I have provided photos.Thank you,Meredithe

Weatherstrip at bottom of Pella 35.5 x 76 aluminum door. Warranty reg# on door 081203 90761 1535. Weatherstrip slides into notch in brass on bottom of door. Weatherstrip is 1/8 x 1/2 x 34 inches. Cross section is a T.

The "cap" located at the bottom of my screen/storm door has a rubber seal 'flap'. It has worn over the years and is not functional. I'm attaching 3 photos.Do you have that rubber seal available? If not, is there a replacement 'cap' that fits a standard screen/storm door with the seal? Thank you, ... (cont.)

Dimensions of current door Sweep Cole Sewell storm door sweep 35 3/16 × 1 1/8 Found a similar post that has same thing and replacement rubber was listed #58-162 Any information would be great