Viewing all customer Discussions for:

39-286 Casement Window Handle, fits Andersen

Need replacement cranks

My window opening handle model number is 3253700, but I can't find it at the moment. Is there a matching model number?

Need replacement parts but not sure what brand window this is

Looking for a crank & the hardware that connect to the window & frame for this style window. Thanks lmk asap

I need 2 rights and 1 left operators and the cranks. Thank you. Craig

Hello- I have some old Anderson windows on a building and I need right and left cranks and handles. Please advise.. I also need handles for existing cranks.

Need part number for the operator shown in the picture.

The crank mechanism is broken on my Andersen window. I am sending you a photo. It looks like the dimension looks correct, but the crank is on the left.

These windows are at least 40 years old. The attachment point to the wire bar on the window has a hollow tube or sleeve attached to the arm that is wrapped around the bar, likely slid in at one end while separated then the bar is attached to the window.

The operator crank mechanism for my Anderson Casement Windows (looking on right side from inside double window) cracked the crank cover while opening the window. I discovered (I think) that when turning crank, the bushing that retains the operator screw is no longer holding and it backs out of the b ... (cont.)

I need 6 cranks for Anderson casement window, the part 3 as far as I can tell is 7191A8

These are Anderson windows installed in our church in about 1983. There are 10 windows total and the cranks have stopped working on 6 of them. Some are left and some are right. Are you able to locate and provide costs on replacements? If yes then I can provide detail on number of left and right ne ... (cont.)

It sits on the top but does not engage. Please let me know your return merchandise procedure. I have included photos to show approximately what the gearing looks like. Thank you, As close as I can measure, it looks like it is 5/8 of an inch. Oddly it fits over the Anderson crank, but only goes ... (cont.)

Anderson window needs crank and window operator mechanisms.

I need help with a part referrer to the attached photos. One is cracked and doesn't open and the other dose not open

Can you tell us which part we need. The window cranks but syops before it is closed and won't turn anymore.

Wood Casement Window Straight Arm Operator 0566208 this is for a old Andersen casement window.

Hi - The fellas at Home Depot sent me your way, and I love that you have a help desk! One of the handles for my Anderson Windows (crack windows) broke from the operator and based on your site, I'm guessing I need to replace both pieces. Photos are attached. I see a number on the plastic cover - A71 ... (cont.)

After receiving the new handles I tried putting them on the mechanism they fit on the stem ok buy at the base of my handle there was a gap about 1/8 or so . I tried the new handle to open and close the window and worked ok but the handle seemed loose and shakey . Should I have Used a rubber mall ... (cont.)

Good Afternoon, I have an Anderson casement window with a split arm operator that no longer functions properly. It has a 5 inch extension. This is an older window. Not sure if this is useful information, but the number 63 is on the arm and 13C or 136? Photos attached. Would you have this part? Than ... (cont.)