Viewing all customer Discussions for:

39-286 Casement Window Handle, fits Andersen

I need to order a Anderson crank, it has a #105 on arm and # 55003 Do you know of any hardware you have that will work? Thank you very much Michael G

mystery casement operator

I need 2 of these operators with screws, handles and wood trim

update: my reference # is D7593, I texted a picture to Josh at tech support, I have been on tour site and think what I am searching for is 1 39-094 and 1 39-095. single arm 9 and 3/8 inch long, left and right. please contact me as I am unsure where my request is ? Thanks Tom

Need replacement cranks

My window opening handle model number is 3253700, but I can't find it at the moment. Is there a matching model number?

Need replacement parts but not sure what brand window this is

Looking for a crank & the hardware that connect to the window & frame for this style window. Thanks lmk asap

I need 2 rights and 1 left operators and the cranks. Thank you. Craig

Hello- I have some old Anderson windows on a building and I need right and left cranks and handles. Please advise.. I also need handles for existing cranks.

Need part number for the operator shown in the picture.

The crank mechanism is broken on my Andersen window. I am sending you a photo. It looks like the dimension looks correct, but the crank is on the left.

These windows are at least 40 years old. The attachment point to the wire bar on the window has a hollow tube or sleeve attached to the arm that is wrapped around the bar, likely slid in at one end while separated then the bar is attached to the window.

The operator crank mechanism for my Anderson Casement Windows (looking on right side from inside double window) cracked the crank cover while opening the window. I discovered (I think) that when turning crank, the bushing that retains the operator screw is no longer holding and it backs out of the b ... (cont.)

I need 6 cranks for Anderson casement window, the part 3 as far as I can tell is 7191A8

These are Anderson windows installed in our church in about 1983. There are 10 windows total and the cranks have stopped working on 6 of them. Some are left and some are right. Are you able to locate and provide costs on replacements? If yes then I can provide detail on number of left and right ne ... (cont.)

It sits on the top but does not engage. Please let me know your return merchandise procedure. I have included photos to show approximately what the gearing looks like. Thank you, As close as I can measure, it looks like it is 5/8 of an inch. Oddly it fits over the Anderson crank, but only goes ... (cont.)

Anderson window needs crank and window operator mechanisms.

I need help with a part referrer to the attached photos. One is cracked and doesn't open and the other dose not open

Can you tell us which part we need. The window cranks but syops before it is closed and won't turn anymore.