Viewing all customer Discussions for:

39-286 Casement Window Handle, fits Andersen

Hello, I have a client, who I believe has a Swisco window. The crank is gone but the shaft remains. The internal extender is also gone. I will attach photos to see if this may be something your company can help with. Thank you!

Need to replace the whole bracket

I need to replace several Anderson window crank assemblies. The part number is 7177-31 R H

I'm looking to replace missing cranks handles for Anderson 7095 window mechanisms. The spline is 3/8". These windows were installed in the early 1970's. Do you have a crank that will work?

I have 3 openers that have been over cranked and will only operate the window in one direction. All three windows have the same mechanism. The only number that I can find is 55003. I am interested in two right side of window opening (R faces up on the mechanism when installed) openers and one left s ... (cont.)

It has been difficult to crank open and close without helping the window by pushing or pulling. Attached find pictures of the crank assembly parts for your identification purposes.

The picture is of the corroded arm on an Anderson casement window. I don't know the age. We live on the coast so that may be the reason for the corrosion. I have not taken the part off as I wanted to check first to see if it is feasible to replace these parts. If it is possible to replace I will ... (cont.)

Hi, We need a replacement part for the piece shown. We included another photo with the handle and other part too. If you could help identify what we need, we would appreciate it. Thank you.

Operator has the numbers 1521604 stamped on it. It was installed approximately 1994. Gray in color. The measurements seem to match part number 39-390.

Hello I think I have a few straight arm mech and dual arm that need replacing from 1985-88 or so.

The serial or ID# in the back of the crank is 7198-17. Screws have rotted as well as the crank.

Scissor type. Awning. Lengths are in pictures. Arms are not stamped with any numbers on top or bottom. Underneath operator are only numbers. Picture included.

Looking to replace broken hardware

Loooking for replacement parts

9970A-3A is on the arm. We are looking for this crank operator for an awning window in our bathroom.It opens on the left and preferably would like a non corrosive one. The window was purchased in or around 2006 and is a Renewal by Anderson window.

The plastic bracket that holds the window to the arm broke so the window will now not open using the hand crank. The one picture shows the piece that is broken and the other window shows the white plastic piece in tact on a different window.

We are looking to purchase a crank operator for an Andersen casement window. The crank is on the right and the window opening on the left. There is a number 39 on the arm of the bar. If you can provide the name of an installer in Chicago, we'd be grateful.

I removed a broken awning window operator from my window. I cannot find a brand or part number on it anywhere. It has a brass plate on the bottom, two arms with shoes on the ends, and a track that the shoes slide on attached to the window. It is a crank style operator but I would like to buy a lever ... (cont.)

Looking for new handles to replace ones which were somehow lost by installing contractor or one of his subs. We also see that several of the locking levers are missing. They are a simple plastic lever extender.

I need both right and left handed options for this window crank.