Viewing all customer Discussions for:

39-286 Casement Window Handle, fits Andersen

Hello. I have what I believe are Andersen windows. The Kitchen window has a broken arm mechanism that I need to replace. The living room window just needs the little knob on the end of the crank.

This is the mechanism use to open and close the windows

Looking for a replacement for the operator attached. It has a stamp on the bottom 7191 2 and then also a sideways 2 above the 7191 as shown in the image. Issue is core gear that the handle slides onto is pulling out.

Split Arm Operator (Left Hand) with Handle for Replacing Damaged Window Crank Fit Andersen Perma-Shield Casement Window

Probably Andersen, the windows are. Base of crank handle is broken. I think I need to replace the entire mechanism.

crank for anderson

Stripped head for crank arm. Need to replace it or the assembly. Thanks

I have Andersen casement windows that were installed in my home in 1939-1940. We are missing the crank handles, it appears a prior owner removed the handles when some interior window shutters were installed that interfered with rotation of the cranks, and then the windows were painted shut. We are ... (cont.)

4" window crank on a vertical window. Left side.

Right side window crank isn't working. Left side works.

Hello, I have a client, who I believe has a Swisco window. The crank is gone but the shaft remains. The internal extender is also gone. I will attach photos to see if this may be something your company can help with. Thank you!

Need to replace the whole bracket

I need to replace several Anderson window crank assemblies. The part number is 7177-31 R H

I'm looking to replace missing cranks handles for Anderson 7095 window mechanisms. The spline is 3/8". These windows were installed in the early 1970's. Do you have a crank that will work?

I have 3 openers that have been over cranked and will only operate the window in one direction. All three windows have the same mechanism. The only number that I can find is 55003. I am interested in two right side of window opening (R faces up on the mechanism when installed) openers and one left s ... (cont.)

It has been difficult to crank open and close without helping the window by pushing or pulling. Attached find pictures of the crank assembly parts for your identification purposes.

The picture is of the corroded arm on an Anderson casement window. I don't know the age. We live on the coast so that may be the reason for the corrosion. I have not taken the part off as I wanted to check first to see if it is feasible to replace these parts. If it is possible to replace I will ... (cont.)

Hi, We need a replacement part for the piece shown. We included another photo with the handle and other part too. If you could help identify what we need, we would appreciate it. Thank you.

Operator has the numbers 1521604 stamped on it. It was installed approximately 1994. Gray in color. The measurements seem to match part number 39-390.

Hello I think I have a few straight arm mech and dual arm that need replacing from 1985-88 or so.