Viewing all customer Discussions for:

39-286 Casement Window Handle, fits Andersen

Is the picture enough info for you to cross reference? I recently bought 32-080 from Swisco & they worked perfectly. That made me think of seeing if you have the Anderson operators. Thank you, Jack

Do you stock these under another part #? Thanks, Mark

I need the lock, cover and Handle for Anderson casement window changing to white

the gear-head, where the window crank attaches, is stripped on our 1961 anderson tilt-out window.I have attached photos of an identical opened window, and of the damaged actuator and good crank. The crank is part no. 60-c-7041-62 I do not see a part number on the actuator. I will have to cut out pa ... (cont.)

I need both a left and right crank , the crank case, the wand, and the piece that wand slides on. These are anderson windows. Thanks, Colleen

Looking to replace right side only. Window will not close once open.

Do I need the adapter plate ( 39-264)?

I have an andersen window about 1959 vintage, i need a short arm operator 7041A

I need a replacementc crank assembly for a 36"x36" Andersen window. Have numbers on the assembly but not sure if they are helpful.

Number on window crank out is 1361316 and an L. We have another window that seems the same and it works, but the number on that one is 1361318.

I have two windows that need the crank and arm hardware replaced. I have uploaded pictures. There are no numbers or manufacturer's markings . I will also need the appropriate crank handles.

I need a replacement operator cover for an Andersen window Stamped inside is 7191 -33 to the far left is the number 8 4 1/2 inches long with 2 holes each close to the edge Can you tell me what I need and the cost? Thanks 1 1/2 inches wide The holes are on each side

Please help identify the crank operator. I believe it is 9" long and it's a right handed operator.

7198-17 R. Andersen casement window crank. It is not the straight arm it has a second part that swivels. Windows are stamped '91 Thanks, Brian

Our home was built in 1957 anderson windows ?? all awning type the window cranks are not working @ need replaced { still original windows } 12 in total. pictures enclosed of a crank all are the same. if more detailed info, is needed please let me know.

My bay window has 3 operators. It is very difficult to open the windows and one of the operator handles is broken. Inside the cover of one of the operators had the number 7191-33.

Generic window, needs knob as it seems to be striped. The window has a straight arm, and the roll out has a bent arm.

I bought about 25 tee type 39-298 for andersen casement windows awhile ago. My goal having rental property and people not quite taking into consideration the cost of replacement operators was to eliminate them getting broken due to the force 39-286 handle puts on the splined shaft. The tee type woul ... (cont.)

where can I find these replacement cranks

Need crank mechanism and handle for one Anderson window, which is part of a bay window and is on the left hand side of the bay window as you look out from inside the house. I took two pictures of the unit need and one picture of the right hand side to show the brackets connection to the window itse ... (cont.)