Viewing all customer Discussions for:

15-181 Double Support Detent Clip

Hello Swisco. I ordered coil Balances in the past from your site (S152-6) and now I need some shoes, coils, and coil bushings. looks like I need the 15-180 Shoe but some of the responses that I read state that I should be using the Series 190 coil balances. Is that correct? Also which coil bushin ... (cont.)

Need help identifying parts attached in photos. Coil parts have a stamp #740

Which coil balance spring should I order? Looking to replace window coil balances spring for My window (vinyl blind is about 36 in W x 72 in L), double coil balance, identify number 7 based on the stamp from the coil. attached related pictures.Thank you!

I have been unable to find any marking or identifier on these window parts. The coil snapped on each side of the window. Please help.

We are looking for replacement parts for this window. The window keeps sliding down.

I did not see any markings on the coil balance so I provided pictures of the widow information label. These are single coil balances. The part with the coil measures 3" long by 3/4" wide by 5/8" deep. These are flush with the channel surface. The part with the pivot shoe measures 2" long by 1" wi ... (cont.)

Please help me identify the part that's in the picture. I think it's the coil balance shoe. The bottom is cracked and the black slotted round part fell out. I need to replace that part and if you have instructions on how to fit the window back in would be very helpful. Thank you! ... (cont.)

Need 2 of these for a vinyl window. 11 lb window. 2 balances Thank you

Hello, I'm looking for a set (right and left) of replacement balances for MI double hung windows. Thank you

Looking to replace three window balances in MI windows they measure 34 1/2" high and 33" wide the springs are broken on the balances and they have a number 740 stamped on them . Replacing the springs would repair the balances in these older windows. Would need six of the 740 coil springs if you hav ... (cont.)

Hello,I have a Certainteed window that needs 2 coil balance assembly (including pivot shoe)for upper window.I appreciate your help finding the correct parts, attached is the number I found on top of the window and the actual part (pivot shoe missing).Hope to hear back from you soon.Thanks MariaMonr ... (cont.)

Only identifier on the balancer is the letter H. Unknown window manufacturer. Uses T pivet bar. Weight of the window is 22 lbs.

Hello and Happy Friday!Looking to replace the balance in my windows that won't stay up. In total about 6 windows and the plastic pieces have worn out and cracked.Any help would be most appreciated!Paul

I need pair this part

the only marking is a 5 on the top coil and a 6 on the bottom coil. 12 of these need to be replaced in 6 windows. Do you have the assembled unit available? The window weight is 20lbs, the window length is 29". Coil thickness is 0.510". The overall length of the plastic piece with the 2 mounting h ... (cont.)

I need 3 of the window hardware pieces in the photo.

Trying to replace coin spring but not sure which type. Measures half inch thick. House was built in year 2001. Thanks.

Can you help me figure out what part this is, I need to replace both the right and left Thank You

I need help identifying the part number for the lower shoe on the left and right that need to be replaced, I've included photos of the broken ones, the ones that are NOT broken, and the window style

We live in a Maronda home that has "MI" (???) windows in it. We need to replace one window sash that lost its seal (turned white inside). But much more urgently, I need to purchase a bunch of the little plastic catches that are screwed onto the upper corners of the lower sashes, which help hold onto ... (cont.)