Viewing all customer Discussions for:

23-119 Bi-fold Door Adjustable Bottom Pivot

Most replacement parts do not have the pivot caps. Therefore we can't use the standard replacement pivots. The size of the cap is 1 1/2 x 1 1/8. We will need eight top and four bottom pivots.

I am looking for this part, it is the one that is the main pivot, it bascically hold all the weight of the door, it is the one that the screw goes in to adjust the door in the opening, there is a insert in the to accept the adjusting scrrew, cant find it anywhere

Do you know what that piece is called, all together?

I was thinking maybe a metal plate across the bottom of the door, with a screw to replace the pin the first picture you can see where the door on the right has the pin in place as needed. The one on the left is the one that is missing the bottom pin also a close up of the pin

I need a bifold door top bracket that is wider than the 7/8 in brackets commonly available. The interior of my top channel is a full 1 inch. A 7/8 in top bracket slips out of the lower flanges of the track. Thanks!

i need to replace a corner bracket that pivots for a closet swing door (for about a dozen doors...) currently it is that stanley 4212 metal bracket with an insert for it that says part no. 01-5264 sorry i have no picture - it is similar to the above pictured track wheel assembly, but it has a pivot ... (cont.)

Do you carry this part? It is the piece that fits into the bottom track mounted next to the floor for a bi-fold door. This part is 1/4 20 and 2 inches long. I need the same one only longer, at least one half inch longer. We got new floors and the new flooring is thinner than the old, hence the need ... (cont.)

Its the bottom part that enables door to open and close. Any help would be appreciated. Thank you

Hello here's the pictures of our door hardware that we would like to replace.

Hello I need a track for bifold mirror Size 72x 1/2" D -1"W Is item 21-455 matching ? Thank you Nancy

Currently searching for a closet bifold door track with pivot bracket for two separate openings. One of the door openings is 48", another opening is 72". Looking for the track as well as bifold pins for this Stanley closet door.

Looking for this rear door glide socket. Off a Scheirich base cabinet drawer. It has "FANO DALY" and "108/55FL" stamped on the drawer glide.

Based on your photos, we believe you need a 23-122 top guide pin to complete the repair for your door. I recommend looking it over to confirm. Tell me if you had any questions, too, I'm happy to help.

Please help to identify this pin for us. Plastic receiver at bottom is broken off. Need new one. Thanks!

I need a replacement for the above part. Can you help me

Need to replace the hard ware for my closet door. The track is 24 inches wide. There are 2 door that are hinged together.. Can you please recommend replacement parts.

I also have an Alliance bifold door hardware. Did the previous writer have any success with this part?My bottom bracket is Alliance 510, and I need to replace a pair of them. I have attached pictures of a part from my good closet with a ruler to help with dimensions. Like your 23-301, my base is 1/4 ... (cont.)

Hardware on my bi fold doors has failed. Please see 4 attached files. "guide.jpg" This is the stationary guide and is cracked. I need a replacement. "slide.jpg" 'Stanley' and '2819' are stamped on this slide. The slide is OK. I am including this picture for reference. "track.jpg" The tra ... (cont.)

Hi, I have a Bi-Fold Closet door which is 6 feet wide and the bottom pivot (23-119) keeps on coming off from the door. A replacement does not stay for long. Does it come longer/bigger width, than the size of 23-119 so the door's weight does not give too much pressure on it ? Thanks ... (cont.)

I have a 36" and 24" bifold wood door that is floor to ceiling (about 8ft tall) and we accidentally threw out the old floor tracks when redoing our floors. We haven't been able to find anything like them and the doors need a bottom track due to weight. Please let me know if you have any suggestions! ... (cont.)