Viewing all customer Discussions for:

32-083 Corner Tack Glide

I need replacement drawer bearings or slides. They are approximately 3/4 be 1/2 inches by about 1/8 or 3/16 of an inch thick

Have a dresser that these little tabs where on each side of drawer I guess to hold level or stop drawer from falling out as you see they are busted what can use to replace thank you

Hello. I purchased a 1960s Dillingham Esprit dresser that has broken drawer guides on quite a few drawers. I am having problems finding the specific part I need to replace. Please see pics. The guides go on either side of the drawer to keep it coming out straight. Thank you!

Hello,I will be ordering the Kenlin Drawer Socket 32-081 and Kenlin Case Runner 32-076 shortly.I am hoping you can help me find the part number for the tack drawer glide (photo attached) sp that I can include in the same order.Thank you.Michael

PHOTO UPLOAD APPLICATION WOULD NOT ALLOW ME TO UPLOAD .PNG IT'S AN L-SHAPE POLY/PLASTIC WITH A HOLE TO INSERT SCREW AND USED TO GUIDE DRAWER

I have looked everywhere for these and No Luck Marshall

Hi I am suffering with this old dresser that I have. The plastic drawer guides have all fallen off and I cant keep them straight. Please help me! I can't seem to find anything online that looks the same.

These are on the bottom of each drawer entry. Used to guide drawers straight and reduce side to side motion..

I am looking for a dresser drawer guide. The part attaches to dresser and keeps the drawer level.

product is made by Kenlin and shows you carry product made by Kenlin such as numbers 32-081 Kenlin Drawer Socket and 32-076 Kenlin Case Runner what I need are the corner track guide Photos attached. if there is a replacement we can use if this is not available, please advise. thank you for your hel ... (cont.)

For your 32-020: Is the thickness for the staple strip or the glide area? For your 32-011: Combining the base and roller, how much of an offset will this create? For your 32-011, 32-020, and 32-114: Are any of these available in black? Do you have matching "buttons" or "strips" that would mo ... (cont.)

This is original 1982 kitchen cabinets Drawers are sliding across these plastic 'bearings/slides' Some are broken, and the drawers don't open smoothly so looking to do a simple fix for now.

Need this plastic piece that guide draw one on each side thank you

Need for reburbished piece

This small piece 3/8" by 3/4" of plastic is used to slide the plastic drawer across. It mounts with a peg into a small hole that is 1/4" in diameter. There are two of these pieces mounted under each drawer, one on either side of the drawer. I would like to buy 8 of these pieces. I can send more p ... (cont.)

Hello, I recently purchased a new house and these are under the kitchen cabinet drawers that are center under mount. The glides seem to keep the drawer level and from sliding from side to side. I have spent a lot of time looking online and cant located replacement. Hopefully y'all can help.Matt ... (cont.)

I'm in a pinch and need to order some of these. Please advise.

Hi, this piece of hardware goes on the bottom of cabinets opening where drawer goes (only under the drawer, in the corners), basically for the drawer to slide in and out easier. It's an inch long in each direction and has one small hole in the middle of each side for it to be nailed in place. The ... (cont.)

Can you tell me if my drawer parts for kenlin 32-134 (attached photos) can be replaced with other kenlin parts that you carry? I purchased a non-refundable dresser with 9 drawers from a consignment store and every single guide, runner and socket are broken. Kenlin drawer guides Kenlin Case ... (cont.)

I have a six drawer Dillingham Esprit dresser that has three broken glides for the sides of the drawers. As you are probably aware, these are pretty peculiar glides that aren't carried at the normal hardware outlets. I don't see this specific part shown on your site, but am hoping you may have it. ... (cont.)