Viewing all customer Discussions for:

39-315 Truth Dyad Operator

I am looking to get the window part that is cracked

My window piece is broken and I need a new part. Can you please advise which piece I need? It's the piece you put the handle into that is broken as seen in the pictures

Hi, I need to identify this crank handle

Hello I need both the right and left side cranks and a lock similar to pictures. The crank housing is 5/8" thick, 2 3/4" wide, 4" long. Name on it is TRUTH LH #45135. #31850 is on the arm. Thank you Caleb

Tried one from your company I thought would work but it didn't

Doors and windows are Weather Shield. Need weatherstripping for 8' French doors. Need crank out for windows also need bottom guide for window pane as well as the bottom track. Need bottom weatherstripping for French doors.

Michael Painter with Clover glass in Richmond,Va 804-893-4959

Hi, I have double windows side by side that crank open and glide out like french doors. The window handle box? and handles need to be replaced. I am not sure how to remove and replace the part attached to the window. It is made of hard plastic shell that has cracked. Thanks for any help and informat ... (cont.)

The 3 crank handles on our window are breaking off at the base (see photo right hand side)I need to identify and order replacement crank assemblies for Series #6100 Bow window purchased around April 2003, purchased from Home Depot, Allentown, PA. Also, I need instructions for replacing cranks. Thank ... (cont.)

I'm looking for four of the attached pictures 2 are left hand and 2 are right hand . There is a Patton number on the back that reads 6.247.270 . I was told the item was discontinued.

Right open window 39-315 was wondering is this the correct part I need thank you for the help

Hi, I purchased 39-315 and 316 to fix a broken right side operator. Right side worked fine, changed the left so they would match, but now the left wont close (1 inch gap). How do I fix this?

I am looking to replace my Casement split arm operator because mine is broken. It is a Original crank and casement?I am not sure if it is the same as the Product Code: 39-315 because mine has 5.5 inch (As the picture) and the 39-315 has 5 inch

Looking for the stud bracket (plate 3 5/8 inch X 1.25 inch X 0.125 inch) to match left opening 39-315

Bad hardware on a vinyl casement

The plastic casing that holds the crank is all cracked. Is this replaceable?

I believe the crack needs to be replaced. I messed with it to see if it could be fixed but no go. Which crank arm and arm operator will work for this? Thank you

Need the replacement and the bracket shown in photo. The post is broken on ours.

have a client with a broken crank. No identifying label or part numbers. could not identify any way to get the cover off??Bill Bills Handyman Services

need help identifying this part