Viewing all customer Discussions for:

39-315 Truth Dyad Operator

Casement window mechanism is shot need to be replaced "TRUTH 31850"

Thank you.

These are the parts I need. I need the crank handle and the whole crank assembly. This is all I have. Thank you!

I need a couple cranks a couple latches and a few of those plastic clips.

Truth brand casement window does not open or close. Window also had water damage as well.

From what I've found I have FERCO brand windows, the arm that attaches to the window frame is 71/2" and the sliding arm is 7". I also need the opening mechanism as the housing is cracked.

Attached is the Pictures of the current window crank which is not opening or closing at this point. We ordered what we thought was the crank, but they were wrong. I am returning them but hopefully you can assist. We will need 5 RH and 5 LH

Vetter window. Can't close or open using the operator but can when I took out the screws holding the operator in place. The other side is about to go also

The only markings I could see are a "CU" followed by a sort of arrow symbol. There is an "A" and "B" on the left and right (respectively) base or mounting plates. The linkage seems to be fine, but both of the crank housings are cracked so the gears are no longer connecting.

Need this part for three separate windows. 1 left side and 2 right side

The only markings area GU and an arrow in the one of the arms. Based on some research I think it's a Silverlone Split Arm

I believe I have Truth Dyad Operators, with folding handles that do not have the pocket. I am interested in upgrading the crank handles and covers to the folding handle and cover with pocket, can this be Done.I also have Truth casement locks where the delrin plastic lock is broken. would like to r ... (cont.)

I am looking for replacement parts for a slider and a window. I need two cranks one left hinge and one right hinged. I also need a slider handle to fit and match the exsisting handles. Finally the customer has asked for replacement screens for both the sliding door and the windows ... (cont.)

Can you help

Stamped "truth" on arm. Window hinge is to the right. Screw holes are 3 1/8 " center to center. Hinged arm

I hope these photos are good enough

Hello, I need to replace some left and right hand window operators with cranks

We are looking to replace all the current hardware with white hardware. Additionally, we are looking to replace the screens with white frames. The screens are 14" by 55". On the handles, it says "Water Shed."

31850 is the number on the window hardware

Window crank does not work to open and close bay windows. Can I just replace the items shown