Viewing all customer Discussions for:

39-529 Truth Hardware Track Slider

Trying to identify replacement part for this window crank? gears are stripped out. It measures 12.15" from the center pin on the straight arm to the center of the crank shaft.

Need a window operator for a Milguard purchased in 2001. The gear is stripped. The only numbers I can find are 40987. Thanks

Sorry I had already removed the operator to search for possible repairable parts. It is a tru brand.

This window was installed 15 years ago. I cannot find a brand. I cannot find any numbers. The problem is that the window will crank open but will not crank shut, so there is a flaw in that little "gear box" inside the window frame. are these pictures good enough? I assume that maybe the crank p ... (cont.)

Need replacements

I am trying to find replacement operators for my Hurd windows in my cottage that were installed in the late 90's. The windows are approx 2'x 5'. Will your operators work?

Square slide with hole in center

Hi, I'm looking for three replacement opening mechanisms for three different Gorell Windows. The first two are the file: 20210708_161621. I need a left hand, and right hand one of these mechanisms. The third is the file 20210708_161818. I need just one of these, with the handle on the Right side ... (cont.)

I need to find the black guide part that sits on the small post at the end of the mechanism and guides the window open and closed.

Trying to replace this hardware on these windows, 3 out of 4 window cranks are stripped

Trying to find parts for my Windows. The Latch, crank, arm and guides have rusted out. The Simonton window part is 39-6313/07. Does anyone know if they still make replacement parts or a comparable part?

Looking for a milgard casement window operator. Purchased it in 2000 or 2001. Thanks. Larry

Looking to purchase replacing hardware identical to this - see picture. It was completed around 2005. Please advise

I ordered the wrong crank. Attached is the crank I need

Looking for this window crank or something that will work

Crank is slipping when opening and closing. What part do I need to replace?

I need to replace a surface mount dual arm operator. There were a few numbers on the crank I have - 410H, 410R, 41011. Looks like the crank was manufactured in 2000

hi, attached are photos of the operator needed.its made by truth. It came from a window installed in 2006.you have something close but it doesn't include the bracket and nylon slide. Thanks,John

I need replacement parts for these two items, top and bottom. Thanks

We are having a hard time locating the attached casement parts. Please help.Thanks,Debbie