Viewing all customer Discussions for:

26-360 Tilt Sash Pivot Bar, 2-1/2"

silver line windows 550 series replacement peg

Broke left sided rod and coil assembly

Good afternoon, I have Barricade triple pane windows and one has broken pivot bars. I need replacements. There are no identifying numbers on it, but photos are attached with a tape measure to give approximate dimensions. Thanks,

Need the name

I need a replacement window sash pivot bar for a Ply-Gem 1500 window. It appears this one was never installed as there are no pieces in the window itself or in the casing of the window. I removed the one that was in the other side and it has a raised part number which is 51699 and I have attached ... (cont.)

Looking to replace this pivot bar for a Farley window. It has a slightly T head with two holes. Hole measurements are above in picture

Can you help me identify this tilt pin.

I need to replace the spring balancers on one of my windows. The following pictures show the broken coil balancer parts. Spring stamped with a 6. The last picture shows the balancer for the other sash that was replace previously. Window dimensions 34.5 X 76. Sash 29 x 27-375. Sash weight 20 pounds. ... (cont.)

Looking for a few pivot bars for my MI double hung windows. I have selected the correct pivot locking show (15-153) but am not seeing a pivot bar that matches this picture. The bar that enters the shoe is 1/2 inch. 1st hole is 1 1/8 from the end, meaning 1/2 in + 7/8 in. Next hole is another 3/4 ... (cont.)

I'm looking for these 2 parts pivot is 4" long shoe is 1/2" thick 1 1/4 wide

I'm looking for a replacement pivot bar for my Plygem double hung vinyl windows. The bottom sash does not operate properly as the pivot bar on the left-hand side broke apart. I took these pictures of the right side pivot bar, which is still intact. The measurements book below are what I got. I've al ... (cont.)

two circles connected with a dash between the two drilled holes Tried hard to find a match on your website. Do you have a universal one?

At our new home, I found one of the windows had a missing pivot mount for a tilt in window. Can you help identify and recommend a replacement and screws as well.Thank You,Tim

Hi there, looking to replace these parts but I'm feeling unsure of the items I've chosen. Here are some specs: Shoe: 1/ 1/4 wide and 9/16 thick Coil: has a #6 on it with a T shaped end Housing: Is this part needed? If so, what part number? thank you greatly!!

"6 LB" on one set, a 42" wide windowno marking on the other set, a 30" wide window

Hi, I have this type of channel balance. I need parts. If you could help me out that would be great. Don't have a Account yet. My name is Michael , I work for local Housing Authority. Thank you

It has the number 2318. That is for the windows

I need 26 of these balances 28C; the balance is 28" long. Can you supply the top clip shown in the photo? Do you have the 1" balance shoe with an open top available? I attached the pivot pin that is on the window now-it is 2.5" long. If you only have the closed shoes available, can you recommend ... (cont.)

Hi what is this coil and what part is can replace it with? Need 2 new ones and also on the bottom of the window there is a metal rod on each corner that goes into thr coil sliders. One of the rods pictured has broken off. Please suggest.

Need a replacement for this blance for an International Window - part is approx 34.5" long