Viewing all customer Discussions for:

26-360 Tilt Sash Pivot Bar, 2-1/2"

"6 LB" on one set, a 42" wide windowno marking on the other set, a 30" wide window

Hi, I have this type of channel balance. I need parts. If you could help me out that would be great. Don't have a Account yet. My name is Michael , I work for local Housing Authority. Thank you

It has the number 2318. That is for the windows

I need 26 of these balances 28C; the balance is 28" long. Can you supply the top clip shown in the photo? Do you have the 1" balance shoe with an open top available? I attached the pivot pin that is on the window now-it is 2.5" long. If you only have the closed shoes available, can you recommend ... (cont.)

Hi what is this coil and what part is can replace it with? Need 2 new ones and also on the bottom of the window there is a metal rod on each corner that goes into thr coil sliders. One of the rods pictured has broken off. Please suggest.

Need a replacement for this blance for an International Window - part is approx 34.5" long

Hi there. looking for these parts. Are they available?

IWC Window. Sash pivot bar broke on both sides of the window. Removed Sash and have window just shut currently. Need to find the replacement part.

The white piece that has the coil wrapped around it normally says 9.0 The coil itself says 9K BD The little black piece has a 4 on it The metal post has 3 holes and says 2318 The clear piece with one hole in the center has an E on it Thabk you in advance, I really need your help. ... (cont.)

Hi, I cannot find these parts for my window

I need 4 of the complete balances for the lower sash to repair 2 sash's. 1 of the metal rods on the bottom left side of one window, 1 part on the upper right corner of the bottom sash that locks the sash onto the frame.

Hello, I need help identifying a part on my MI window. The metal part in the photo is part of the window that slides into the counter balance. However, it broke and now the window will not stay up. The counter balance coils seem fine, just the window will not lock into counter balance on one side. ... (cont.)

Hello, I have to replace some of the counterweight hardware on a Mastic double-hung window owned by my landlords. I poked around and took the attached pictures. Please let me know which parts I should order! The counterweights are broken on both sides. Many thanks. Here are the photos you reque ... (cont.)

two holes pivot bar- please help to identify the right part for purchase

I need a straight pivot bar for a jenweld double hung window. Paul

Help locating these coils

I am looking for pivot and sash shoe parts

My window is a Series 810 Tilt Single hung dual panes made by Phillips. It is my understanding they went out of business in 2009.I saw no markings on the metal balancer, the metal balancer is 30 inches long.Please advise if you can help or if you need more info.Thank youMark

It has an A on one side of the pivot bar and the numbers 23143 on the other.snapping in every hurricane window - top sash weighs #41 lbs, bottom sash weigh 47 lbs.just replace window with new coils and foots. Discovered these were bent and snapping from use.Similar to the 26-021 pivot bar , but the ... (cont.)

House window broke.I need 2 balancers and 2 pins.Please help me find the correct parts.The stamp on balancer, 38 inches long, housing reads.38E. PB BS1Photo ending in 3103 is width of balancer housing.Let me know what additional information or photos that may help.Thank youPreston ... (cont.)