Viewing all customer Discussions for:

15-188 Pivot Lock Shoe, 1/2" Thick, Blue Brake

This part is where the window mounts into frame to allow window to slide in the tank as well as leaned in to be cleaned.

Existing pivot shoes are 1/2 thick 1 1/4 wide and 2 1/8 tall The other photo is spiral balance retainer which is inserted into the sash track I need pivot shoes that work for spiral balance and pivot bar item #26-398

Need the right pivot shoe replacement to match 26-226 pivot head. The pivot shoe need to attach to spiral ballast.

Hello, I am hoping you can help with a window repair project. I have a home with 8 vinyl windows (no manufacturer name I can find), all of which have broken (cheaply made!) balances. The balances are spring loaded, and mostly plastic parts that deteriorated over their 15-year life. The window sa ... (cont.)

Need pivot shoes for Windows marked seasons hold on locking mechanism. Tag says they are series 7100.

Hello,Trying to locate the replacement pivot shoe for my vinyl double hung tilt windows. Not sure on window name or model.Shoe sizes are 9/16" thick2 1/8" tall1 1/4" wideI ordered part 15-152 thinking it would work but the part that the window locks into is different. On my pivot shoe it looks like ... (cont.)

I need 24 pins like this and 24 spiral balance plastic slides with the cast aluminum receiver so the spiral balance has something to attach to. Thx

I ordered shoe 15 129 to replace my broken shoes. The dimensions to fit the track were fine but the lock itself is different. The pin from the window has a wide shoulder in the center. As you can see from the picture. Do you have this shoe or a replacement pin? Thanks for helping. ... (cont.)

I need pivot shoes and post. I've attached photos. Shoe size is 9/16 thick " tall 1 3/16" wise. Pivot bar is 3 1/8" long with a round head that is 3/8" wide

What part do I need to order? The one on the right side of the window is broken. 3 pics of left side. 1 of right. Thanks in advance!

Hello Swisco, I am looking for two different pivot shoes. Both are for vinyl tilt double hung replacement windows. Both are 1/2" thick. Pictures show some intact pivot shoes and the broken ones. Any help or recommendations would be greatly appreciated! Thank you, Ian Swisco is a super great res ... (cont.)

Hi could you please tell me what size # pivot shoe I would need by these pictures and how much they would be . Thank you Jim

I have purchased a condo that has double hung vinyl tilt windows. I do not know the brand or age of windows, my guess is more than 20 yrs old. None of the windows operate with ease and one is missing the locking device and the shoe is broken. Obviously the shoe and locking device need to be replaced ... (cont.)

Hello, I'm trying to find these parts, there is no name or numbers on the parts, but it's for a vinyl replacement window. We think it's a shoe balance, but we're not sure.

Looking for this part, nylon slide that the balaster goes in. It's 2'' high, 1 1/4'' wide, 1/2" thick. It's a jeldwin window older model, 7100 series. HR50 37x74

Hi, looking for balance and boots for Integra series 201 vinyl replacement windows. Balance is 16" sash is about 15 lbs.Will need 4 of each. Also bulb seal for a bottom sash. Appreciate any help.

Can you help me identify a replacement for this? According to my measurements it is 1/2" thick, 1 1/4" wide, and 1 1/8" tall

I have been trying to locate this part I haveattach photos please let me know if you can help or need more info thanks 3 Attachments

Attached is what is probably a warranty sticker for the windows for which we need parts, as well as pics of the three parts we need. I have named the parts according to function. The windows are vinyl double-hung windows. 1) The window actuator (round steel part with square hole into which the wi ... (cont.)

I am in need of many replacement parts for some double hung windows. Please review the photos