Viewing all customer Discussions for:

15-188 Pivot Lock Shoe, 1/2" Thick, Blue Brake

There are no markings on this window. I have several of these shoes that have broken and need to replace.

1 1/2 x 2 1/2 was looking into the 15-188 would like to know which shoe could work as a replacement

Do you sell just the zinc cam for the shoes with blue break?

Looking for the piece in the bottom of the window that attaches to the balancer. Image 172 is what I need. Image 169 is what it fits into.

Need Pivot Shoe, 1/2" thickness as shown in the picture Need Pivot Bar, 1.5" (9864 part#) Need crank Spiral balance diameter 5/8" Tube balance lenght 25" Red tip Window size top 29.5wx29h, bottom 30.5w x29h

I have several broken cams. Do I need to replace the entire shoe?

I am in need of replacement picot shoes- will the 15-152 fit. Dimensions look correct for what I measure. 9/16 thick 21/8x11/4. Thanks

Hi, I was referred to you by American Craftsmen. I have 5-6 windows that need to have their pivots replaced because their are broken. I don

Hi - this is the shoe in a Crystal window. Can you please tell me the right replacement part? Thanks.

I have located all the parts I think I need except for these pivot shoes for my spring balances. Help!

I'm looking to replace the entire balance, pivot bars and pivot shoes on two windows in my home. The window jamb does not have cut outs to easily remove the pivot shoes but I'm concerned the vinyl/plastic components to the jamb will snap if I attempt to use the jamb spreaders. Do you have any sugges ... (cont.)

Hi this is crystal windows about 20 years old. The width is 1.5in The length 2inches Thanks

Hello, Reference is to the attached photos. A previous contractor ordered the part on the right. They did not work. Old part is on the Left. The pivot has a slot inside the barrel that locks the male into it. This is why the replacement did not work. These were ordered from SWISCO; but I d ... (cont.)

I have a number of windows all installed at the same time (approx. 20 years ago), but cannot find any identification on the windows. Attached find a photo of the pivot shoe balance with some dimensions. Could you assist me in finding a replacement? The barrel part is the only failed part, bu ... (cont.)

I have to replace several pivot shoes. The dimensions and picture of your part number 15-118 look exactly like my part; however, I would like to get a pivot shoe that has an opening (an opening or slot in the cam) so that the sash could be removed more easily. The windows are very heavy and its no ... (cont.)

We are trying to find these pivot lock shoes for our windows. Can you help us?

Hello- In the past, I have purchased your Part # 15-067 which is no longer made. Your 15-118 has been recommended as a replacement but frankly I do not like what I see as to the way it is designed. It also appears to me that a 15-129 or 15-153 or 15-178 would work. My windows are "quite old" (20+ ye ... (cont.)

The shoe is approx 2 in by 5/8 In by 1 1/8. The spiral spring is 28 inches long and the diameter of it was around 7/16. These windows are vinyl from 2001. Can't figure out manufacturer. Looking for replacement parts and prices.

I have Seasonshield Vinyl windows on my house that were purchased in 2004. On two of them, I need to replace the Spiral Balances, and on one of them the Pivot Shoe is broken. The tubes are 3/8" with a white plastic piece at the bottom. They have a white plastic sleeve around them. The top connects t ... (cont.)

I need about ten of these..the metal cam is broke on quite a few...seems like a good time to multiple replace these